StarTech, 8K-A-30F-HDMI-CABLE, 30ft (9.1m) HDMI 2.1 Hybrid Active Optical Cable (AOC)
Features:
- Designed for long range: Hybrid Active Optical HDMI 2.1 cable delivers 8K 60Hz beyond the length of standard copper cables; the fiber optic inner cores greatly reduce EMI for optimal signal quality and minimal degradation; note: cable is unidirectional
- Plenum rated: Ultra high speed HDMI Hybrid AOC is plenum-rated (CMP) for safe installation in plenum spaces; suitable for ceiling, conduit, and in-wall cable runs; for use in commercial environments where compliance with fire codes must be considered
- Versatile performance: Full-featured HDMI 2.1 enables dynamic HDR10+ w/12-bit processing for vibrant picture quality; 7.1 and 32-ch audio w/eARC; ideal for video walls, conference rooms, and dedicated video/media devices; compatible w/HDMI 2.0/1.4/1.2
- Quality construction: Shielded gold-plated connectors rated beyond 10,000 insertion cycles; optical fiber core reinforced w/Aramid strands for tensile strength; tested beyond 6,000 bending cycles at 120°; labeled connector ends for source and display
- specs: Black; 100-foot (30.4-meter); unidirectional; CMP (Plenum-Rated); Ultra High Speed HDMI 2.1 supports HBR3/FRL/HDR10+/DSC 1.2a/HDCP 2.3; 48Gbps; 8K 60Hz/4K 120Hz/1440p 240Hz; 4.6mm (0.18in) O.D.; ideal for long cable runs
Route this Ultra High Speed HDMI 2.1 Hybrid Active Optical Cable (AOC) through office plenum spaces for long distance transmission of 8K 60Hz video and high quality audio. The HDMI 2.1 AOC incorporates a hybrid construction consisting of fiber optic cores and copper conductors. This enables the offloading of low-bandwidth signals (EDID/HDCP/eARC) to maintain high-bandwidth transmission of 8K 60Hz video over fiber. The fiber optic inner cores and shielded copper conductors greatly reduce EMI for optimal signal quality across longer distances. This Plenum-Rated HDMI 2.1 Cable features a CMP-rated cable jacket with low-smoke and flame characteristics. It is ideal for use in plenum spaces in buildings (e.g., ceilings and in-wall installations). The optical fiber core is reinforced with Aramid strands for tensile strength, and is rated to withstand over 6,000 bending cycles at 120 degrees. This protects the cable from damage when routing through tight spaces requiring multiple bends. The 4.6mm (0.18in) cable outer diameter is flexible and slimmer than typical passive HDMI cables, making it suitable for installation in space-constrained environments. Please Note: This cable is unidirectional and must be installed in a specific direction. Please refer to the SOURCE and DISPLAY labels on the HDMI connectors to ensure that each end corresponds with the correct hardware. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
