IFM PY9071 7250PSI Pressure 2 Output Sensor with Display
Condition: 
Brand New
Brand New $1,805.00 /Each
Manufacturer warranty Description
Features:
- Suited for use in homogenizer processes
- Programmable switching output with IO-Link and scalable analog output
- Red/green display for clear identification of the acceptable range
- The process connection can be rotated for optimum alignment
Applications
- Flush mountable for the food and beverage industry
For more information, please see 
Data Sheet
Technical details
Main features
- Material 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT+PC-GF30; PBT-GF20; PC
- System Gold-plated contacts
- Output Signal Switching signal; analog signal; IO-Link; (configurable)
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 2
- Process Connection Homogenizer connection
- Output Function Normally open / closed; (configurable)
- Electrical Design PNP/NPN
- Protection IP 67
- Pressure Rating (PSI) 7250
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 18 - 30 DC; (to SELV/PELV)
- Media Liquids and gases
- Reverse Polarity Protection Yes
- Current Consumption [mA] < 35
- Minimum Insulation Resistance [MΩ ] 100; (500 V DC)
- Analog Current Output [mA] 4 - 20; (scalable 1: 5)
- Maximum Load [Ω ] 500
- Ambient Temperature [° C] 5 - 80
- Storage Temperature [° C] -40 - 100
- MTTF [Years] 142
- Weight [g] 1447
- Medium Temperature [° C] 5 - 90; (for further details see section Diagrams and graphs)
- Type of Pressure Relative pressure
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Analog Voltage Output [V] 0 - 10; (scalable 1: 5)
- Minimum Load Resistance [Ω ] 2000
- Repeatability [% of the Span] < ± 0,1; (with temperature fluctuations<10 K; Turn down 1: 1)
- Characteristics Deviation [% of the Span] < ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)
- Long-Term Stability [% of the Span] < ± 0,05; (Turn down 1: 1; per 6 months)
- Temperature coefficient Zero Point [% of the Span / 10 K] 0,2; (5 - 80 ° C)
- Temperature Coefficient Span [% of the Span / 10 K] 0,2; (5 - 80 ° C)
- Materials (Wetted Parts) Stainless steel (1.4435 / 316L)
- Minimum Pressure Cycles 60 million; (at 1.2 times nominal pressure)
- Maximum Voltage Drop Switching Output DC [V] 2
- Power-on Delay Time [s] 0.3
- Pressure Rating [MPa] 50
- Permanent Current Rating of Switching Output DC [mA] 250
- Damping Process Value dAP [s] 0 - 4
- Damping for the Analog Output dAA [s] 0 - 4
- Parameter Setting Hysteresis / window; normally open / closed; switch-on/switch-off delay; Damping; Display Unit; current/voltage output
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9
- Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 1
- Process Data Binary 2
- Minimum Process Cycle Time [ms] 2.3
- Type of Short-Circuit Protection Yes (non-latching)
- Min. bursting pressure [MPa] 100
- Measuring Element Diaphragm seal
- Vacuum Resistance [mbar] -1000
- Hysteresis Deviation [% of the Span] < ± 0,1; (Turn down 1: 1)
- Measuring range [MPa] 0 - 25
- Integrated Watchdog Yes
- Switching Frequency DC [Hz] < 500
- Set point SP [MPa] 0.15 - 25
- Reset point rP [MPa] 0.05 - 24.9
- Analog start point [MPa] 0 - 20
- Analog end point [MPa] 5 - 25
- In steps of [MPa] 0.05
- Switch Point Accuracy [% of the Span] < ± 0,4; (Turn down 1: 1)
- Response Time [ms] < 1.5
- Delay Time Programmable dS, dr [s] 0 - 50
- Maximum Response Time Analog Output [ms] 3
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.