| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Measuring range [psi] | -15 - 15 |
| Process Connection | Threaded connection 1/4" NPT Internal thread |
| System | Gold-plated contacts |
| Media | Liquids and gases |
| Medium Temperature [° C] | -25 - 80 |
| Min. bursting pressure [psi] | 725 |
| Pressure rating [psi] | 290 |
| Type of Pressure | Relative pressure |
| Electrical Data |
| Operating Voltage [V] | 18 - 32 DC; (to SELV/PELV) |
| Current Consumption [mA] | < 35 |
| Minimum Insulation Resistance [MΩ ] | 100; (500 V DC) |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Power-on Delay Time [s] | 0.3 |
| Integrated Watchdog | Yes |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Outputs |
| Total Number of Outputs | 2 |
| Output Signal | Switching signal; analog signal; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2 |
| Permanent Current Rating of Switching Output DC [mA] | 250 |
| Switching Frequency DC [Hz] | < 500 |
| Number of Analog Outputs | 1 |
| Analog Current Output [mA] | 4 - 20; (scalable 1: 4) |
| Maximum Load [Ω ] | (Ub - 10 V) / 20 mA |
| Analog Voltage Output [V] | 0 - 10; (scalable 1: 4) |
| Minimum Load Resistance [Ω ] | 2000 |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Overload Protection | Yes |
| Measuring/Setting Range |
| Measuring range [psi] | -15 - 15 |
| Set point SP [psi] | -14.8 - 15 |
| Reset point rP [psi] | -14.9 - 14.9 |
| Analog start point [psi] | -15 - 7.5 |
| Analog end point [psi] | -7.5 - 15 |
| In steps of [psi] | 0.1 |
| Accuracy / Deviations |
| Switch Point Accuracy [% of the Span] | < ± 0,4; (Turn down 1: 1) |
| Repeatability [% of the Span] | < ± 0,1; (with temperature fluctuations<10 K; Turn down 1: 1) |
| Characteristics Deviation [% of the Span] | < ± 0,25 (BFSL) /<± 0,5 (LS); (Turn down 1: 1; BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis Deviation [% of the Span] | < ± 0,1; (Turn down 1: 1) |
| Long-Term Stability [% of the Span] | < ± 0,1; (Turn down 1: 1; per year) |
| Temperature coefficient Zero Point [% of the Span / 10 K] | < ± 0,2; (-25 - 80 ° C) |
| Temperature Coefficient Span [% of the Span / 10 K] | < ± 0,2; (-25 - 80 ° C) |
| Reaction Times |
| Response Time [ms] | < 1.5 |
| Damping Process Value dAP [s] | 0.01 - 4 |
| Damping for the Analog Output dAA [s] | 0.01 - 4 |
| Maximum Response Time Analog Output [ms] | 3 |
| Software / Programming |
| Parameter Setting | Hysteresis / window; normally open / closed; switching logic; current/voltage output; Damping; adaptation of displayed values; display can be rotated and switched off; Display Unit; Zero point; span |
| Operating Conditions |
| Ambient Temperature [° C] | -25 - 80 |
| Storage Temperature [° C] | -40 - 100 |
| Protection | IP 65 |
| MTTF [Years] | 167.14 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical Data |
| Weight [g] | 256.5 |
| Material | Stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; PTFE |
| Materials (Wetted Parts) | Stainless steel (1.4305 / 303); ceramics; FKM |
| Minimum Pressure Cycles | 100 million |
| Process Connection | Threaded connection 1/4" NPT Internal thread |
| Restrictor Element Integrated | No (can be retrofitted) |
| Display Unit | Mbar; kPa; psi; inH2O; inHg |
| Electrical Connection |
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |
