Fluke FLK-1662 SCH Multifunction Tester with Schuko Plug

Brand: Fluke

Part #:

FLK-1662 SCH

Condition:

Brand New

Choose Plug Type

Schuko Plug US plug

Check availability

Manufacturer warranty

Description

FLK-1662 SCH Includes Only:

6x AA (IEC LR6) cell batteries
C1600 hard carrying case
Zero adapter
Heavy duty mains cord
STD standard test lead set
C1600 hard carrying case
Padded carrying and waist strap
Quick reference guide
TP165X remote control probe and lead

Features:

Tests voltage and frequency
Checks wiring polarity to detect broken N wires
Measures insulation resistance and loop and line resistance
Measures motor windings with continuity test
Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)

The Fluke 1662 installation tester gives you Fluke reliability and all the basic testing power you need for day-in, day-out installation testing. It tests to all local regulations and is easy and intuitive to use. Additional helpful features like the On/Off switchable auto-start for RCD and loop test, and self-test save time and give you more confidence in your results.

Check availability

Technical details

Main features

Range 500 V, 10 Ω / 0.001 Ω / High current mΩ mode, 1000 A / 10 kA (50 kA)
Measurement Range RCD Type G: 310 ms, 50 ms RCD Type S: 510 ms, 160 ms
Resolution 0.1 V, 0.01 Ω / 0.1 Ω / 1 Ω, 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ, 1 A / 0.1 kA
Plug Type Schuko Plug
Overload Protection 660 V rms
Current Range 30% to 110% of RCD rated current¹
Safety Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
Performance EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition
Step Size 10% of IΔN²
Sealing IP-40
Size (L x W x H) 10 x 25 x 12.5 cm
Test Voltage 100 V 250 V 500 V 1000 V
Input Impedance 360 kΩ
Overvoltage CAT III / 500V; CAT IV 300V
Notes Responds to AC General, no delay Time delay Responds to pulsed signal Responds to smooth DC signal, 1000 mA type AC only 700 mA maximum type A in VAR mode, 30% to 150% for Type A IΔN > 10 mA 30% to 210% for Type A IΔN = 10 mA 20% to 210% for Type B
Measurement Accuracy ±5%
Open Circuit Voltage >4 V
Accuracy 45 Hz – 66 Hz 0.8% + 3
Range (autoranging) 20 Ω / 200 Ω / 2000 Ω
Accuracy of tTest voltage (at rated test current) +10%, -0%
Insulation resistance range 20 MΩ / 50 MΩ 20 MΩ / 100 MΩ 20 MΩ / 200 MΩ 20 MΩ / 200 MΩ / 500 MΩ 20 MΩ / 200 MΩ / 1000 MΩ
Test current 1 mA at 50 kΩ 1 mA at 100 kΩ 1 mA at 250 kΩ 1 mA at 500 kΩ 1 mA at 1 MΩ
Computation Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD Type A, AC, G, S
Current settings 10-30-100-300-500-1000 mA – VAR 10-30-100 mA
Multiplier x ½, x 1 x 5
Specified trip current ranges (EN 61008-1) 50% to 100% for Type AC 35% to 140% for Type A (>10 mA) 35% to 200% for Type A (≤10 mA) 50% to 200% for Type B ²5% for Type B
Weight (incl. batteries) 1.3 kg
Battery size, quantity Type AA, 6 ea.