Choose Options
$1,404.00 /Each
Notification
This product will be drop-shipped directly from the manufacturer. We will provide you with the manufacturer's lead time once advised.
Manufacturer warranty Description
Features:
- Conveniently measure current without having to disconnect the load
- 2,000A AC and DC current clamp
| Unit of Measure | Pack of 3 pcs |
Technical details
Main features
- Weight 0.710 kg (1.6 lbs), including battery
- Dimensions 110 mm x 270 mm x 46mm
- Accuracy ± 0.8 % of reading ± 0.2 % of range
- Options One Current Clamp
- Output Cable 1.5 m (60 in) Shielded Coaxial cable with BNC plug
- Ingress protection IEC 60529, IP40
- Operating Humidity ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)
- Operating Altitude 2,000 m (6560 ft)
- Temperature Coefficient 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
- Current Range 2000 A ac rms, ± 2000 A dc
- Safety IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
- Battery Life 150 hours (typically)
- Storage altitude 12,000 m (40,000 ft)
- Temperature Operating -10 °C to 50 °C (14 °F to 122 °F)
- Power Supply Type 2 x AA alkaline battery, IEC LR6
- Load Impedance >1 MΩ and <10 pF
- Output Sensitivity 01 mV/A
- Low Battery Indicator Yes
- Working Voltage 1000 V AC RMS or DC
- Maximum Conductor Size 52.0 mm (2.05 in)
- Maximum Jaw Opening 81.5 mm
- Output to Zero Auto adjustment with Zero button
- Storage (battery removed) -30 °C to +60 °C (-22 °F to +140 °F)
- Demagnetize Clamp Open and close the Clamp jaws several times with soft cli-ck, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.
- Bandwidth for Accuracy Specification DC to 400 Hz
- Frequency Response (small signal) DC to 20 kHz (-3 dB)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.