Fluke 80I-2010S/3PK AC/DC Current Clamp, Three in Pack, 2,000A

Part #:

80I-2010S/3PK

Condition:

Brand New

Manufacturer warranty

Features:

Unit of Measure	Pack of 3 pcs

Unit of Measure

Pack of 3 pcs

Main features

Weight 0.710 kg (1.6 lbs), including battery
Dimensions 110 mm x 270 mm x 46mm
Accuracy ± 0.8 % of reading ± 0.2 % of range
Options Three Current Clamp
Output Cable 1.5 m (60 in) Shielded Coaxial cable with BNC plug
Ingress protection IEC 60529, IP40
Operating Humidity ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)
Operating Altitude 2,000 m (6560 ft)
Temperature Coefficient 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
Current Range 2000 A ac rms, ± 2000 A dc
Safety IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Battery Life 150 hours (typically)
Storage altitude 12,000 m (40,000 ft)
Temperature Operating -10 °C to 50 °C (14 °F to 122 °F)
Power Supply Type 2 x AA alkaline battery, IEC LR6
Load Impedance >1 MΩ and <10 pF
Output Sensitivity 01 mV/A
Low Battery Indicator Yes
Working Voltage 1000 V AC RMS or DC
Maximum Conductor Size 52.0 mm (2.05 in)
Maximum Jaw Opening 81.5 mm
Output to Zero Auto adjustment with Zero button
Storage (battery removed) -30 °C to +60 °C (-22 °F to +140 °F)
Demagnetize Clamp Open and close the Clamp jaws several times with soft cli-ck, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.
Bandwidth for Accuracy Specification DC to 400 Hz
Frequency Response (small signal) DC to 20 kHz (-3 dB)