| General |
| Dimensions (HWD) | 1 9/16" x 8 1/4" 7 3/16" (4 cm x 21 cm x 18.2 cm) |
| Weight | 2.80 lbs (1.27 kg) |
| Certifications | - FCC Part 15 Class A
- CE EN 55022
- CE EN 55024
- CE EN 60065
- IEC 60065
- IC
- UL 60065
- RoHS / WEEE compliant
|
| Power Consumption | - Without Panel: 120VAC at 170ma, 20W
- With Panel: 120VAC at 410ma, 50W
|
| Start-Up Inrush Current | 17.2 A at 116.8 VAC for 80 µsec |
| External Power Supply | MIC AC Universal Power Cord (CA1090-131) |
| Video |
| Max Number of Active Video Streams | 1 |
| Video Preview Image Format | JPEG (accessed over HTTP) |
| Max Number of Video Preview Images | 10 |
| Min Refresh Time of Preview Images | 2 sec per preview image |
| Video Input | HDMI, DVI, RGBHV, S-Video, composite or component video |
| Video Input Resolutions | Video Input Resolutions supported by Firmwarev2.1.28 or higher:- HDMI: 640x480p at 60Hz, 800x600p at 60Hz, 1024x768p at 60Hz, 1280x720p at 60Hz
- DVI: 640x480p at 60Hz, 800x600p at 60Hz, 1024x768p at 60Hz, 1280x720p at 60Hz
- RGB/GRAPHICS: 640x480p at 60Hz, 800x600p at 60Hz,
- 1024x768p at 60Hz, 1280x768p at 60Hz
- COMPONENT: 720x480i at 60Hz, 720x480p at 60Hz
- 720x576i at 50Hz, 720x576p at 50Hz
- SVIDEO: ntsc, pal-bghid, pal-m
- COMPOSITE: ntsc, pal-bghid, pal-m
Note: When using the MXA-MPL for displaying live motion streams, make sure to use the supported resolutions with the video input type. While the MXA-MPL is capable of supporting up to 60 Hz, the Modero X display panels that use MXA-MPL only support 30 Hz.Video Input Resolutions supported by Firmware versions previous to v2.1.28:- HDMI/DVI: 640 x 480p at 60 Hz, 800 x 600p at 60 Hz, 1024 x 768p at 60 Hz,1280 x 720p at 60 Hz
- PAL: 576i, 576p at 50 Hz
- NTSC: 480i, 480p at60 Hz
Video Input Resolutions not supported:- 1280 x 768p at 60 Hz, 1920 x 1080p at 60 Hz
|
| Supported Video Codecs | MPEG-2-TS: H.264 High Profile atLayer 4, AAC-LC up to720p at 25 fps (decode) |
| Video Output | Up to 720p at30 fps over IP (Matches input resolution) |
| Communications |
| Ethernet | 10/100 port, RJ-45 connector with Ethernet/IP passthrough |
| Audio |
| Audio Input | Unbalanced 1/8th-inch mini-jack connector (nonHDMI audio only) |
| Front Panel Components |
| Power | (1) LED (green) lights when device is receiving power |
| Status | (1) LED toggles on/off green every 5 seconds if communicating to the panel (i.e. the panel is configured to use the MXA-MP) |
| Video Input | (1) LED (red) lights when receiving video signals |
| LAN | (1) LED (green) lights when the LAN connection isenabled |
| Panel | (1) LED (green) lights when device is connected to thepanel |
| Video Output | (1) LED (red) lights when sending a video stream to atouch panel |
| Reset Button | Reboots the unit when pressed |
| Factory Reset Button | Resets the unit to factory defaults when pressed for at least 5 seconds |
| Rear Panel Components |
| DVI-I | DVI-I multi-format video input |
| Diagnostics Output | HDMI diagnostics output (720p only) |
| Analog Audio Jack | 1/8th-inch mini-jack input (for use with non-HDMI audio only) |
| Power Output | 2-pin 3.5 mm Phoenix-style connector output, 12 Volts, 3 Amps |
| Ethernet In | (1) 10/100 port, RJ-45 connector for connection to network |
| Ethernet Out | (1) 10/100 port, RJ-45 connector for connection to touch panel |
| Power | IEC power cord connector 100-240V AC 47-63 Hz |
| Environmental |
| Temperature (Operating) | 32° F to 104° F (0° C to 40° C) |
| Temperature (Storage) | 4° F to 140° F (-20° C to 60° C) |
| Humidity (Operating) | 20% to 85% RH |
| Humidity (Storage) | 5% to 85% RH |
| Power (Heat”) Dissipation | 232 BTU/hr |
