Weber Sensors 4120.13M Flow-Captor Switch, PNP N.O., Water-Based
Brand NewChoose Configuration
Notification
Please review our Return Policy.
Manufacturer warranty Description
Weber Sensors, 4120.13M, Flow-Captor Switch, PNP N.O. Closer Currentless, Water-Based
Features:
- Precise switching sensor for water- and oil-based media up to 100 bar
- High accuracy even under low flow condition
- Separate adjustment for range and set-point
- Analog display of actual flow and display of the adjusted set-point
- LED-display of output status
- ISO 9001 : 2008
The flow-captor 412x.1xM is a further development with an additional pressure resistance. This highly accurate metering - flow switch is used in every industry where flow monitoring - measuring and displaying liquid media is of importance. With this flow-captor it is possible to set an exact flow set-point and simultaneously measure the flow speed, even up to very low flow conditions.
Sensor head:
The sensor head is constructed of only one piece of electro polished stainless steel and without any sensor element intruding into the medium. Easy installation by means of T-piece or welded fitting. For aggressive media special materials as Titanium, Hastelloy, Monel or a special sensor coating can be offered. The electronics inside is completely epoxy resin encapsulated.
Connection diagram:
Technical details
- Configuration Closer Currentless / Water-Based
- Pressure Maximum 100 bar (1450 PSI)
- Operating Voltage 18 to 30 VDC, incl. residual ripple
- Current Consumption Maximum 150 mA (pulsed)
- Measuring Range 0-20 cm/s to 0-300 cm/s, continuously adjust.
- Protection Class IP 67
- Electrical Connection M12X1, 4 pin
- Thread G 1/2" BSP, alt. 1/2" - 14 NPT
- Power Consumption approx. 1 W
- Output Type PNP N.O.
- Response Time 2 s - 10 s depending on range setting
- Ambient Temperature -20 °C to +70 °C
- Hysteresis ca. 10%
- Temperature Drift < 0,3% K
- Medium Water-based media
- Medium temperature -20 °C to +80 °C
- Initial operation approx. 10 s after connection of power
- Linearity deviation < 5%
- Set-point range approx. 15%-90% of range setting
- Switching current ≤ 400 mA
- Circuit protection reverse polarity, short circuit and overload
- Voltage drop < 2,5 V at Maximum load
- Repeatability tolerance < 2%
- Body dimensions D 66 x H 99/59
- Electrical output without flow PNP n.o. (closer) currentless
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.