Trumpf 2744099 TruTool TKA 1500 Deburrer without Tool

2744099 Includes Only:

• Stop prism, for easy run-in to the sheet metal
• Lubricating grease "G3", 100 g
• 4 multi-edge cutters
• 45° multi-edge cutter mount
• Case
• Box for small parts
• Safety glasses
• Screwdriver set

Features:

• Ergonomic operation
  • The handle shape, size and positioning are perfectly matched to each other. This not only ensures safe machine guidance, but also supports the chamfer quality.
• In the blink of an eye
  • Chamfer lengths can be set as required without the need for any tools, with a max. ¾ manual turn. In this way, you have a clear view of the dial ring
• Consistent edge quality
  • High-quality results with burr- and oxide-free surfaces, without material change and at a constant angle adjustment.
• Versatile use
  • For straight edges, inner and outer contours and holes larger than 80 mm.
• Simply get started
  • The stop prism ensures easy run-in to the sheet metal for straight sheet metal and when processing outer contours.
• 2 in 1
  • At the same time, the stop prism acts as chip protection. The chips fall on the floor in a controlled manner, ensuring a high level of occupational safety.

Applications:

• For rounded edges with a radius of 2 mm, 3 mm, or 4 mm. For deburring and welding seam preparation.

The TruTool TKA 1500 is equipped with a powerful and robust 2600 W motor, which at the same time will impress you with its extremely low noise level and enable you to work without getting tired. The resulting stable machine guidance in combination with the ergonomic guide and motor handle also has a positive effect on the chamfer quality. You can create chamfer lengths of up to 15 mm and fix them in a continuously adjustable manner without tools. The result: high-quality, repeatable edges right away - without rework. With the TruTool TKA 1500, you can create clean visible edges, break off sharp edges, add a radius or prepare a weld seam. Any oxidation or deformation of the material is avoided.

Excellent Guidance

The guide handle provides maximum stability while applying optimum pressure. The tool can then be safely and precisely guided. The low handle, just nine centimeters from the work surface, minimizes the tilt moment and enables you to guide the device smoothly with minimal effort.

In the Blink of an Eye

You can set the chamfer length as required using a dial ring over the support plate. A maximum of a 3/4 turn enables you to set the desired length precisely, quickly, and without tools. The cutting depth setting is firmly fixed during machining. A dimensionally accurate fine adjustment is required to produce radii. The dial ring also makes this easy to achieve.

Dimensions: