Tek-Trol 4300C-01-A-01-A-01-A-01 90' Range Level Transmitter
Condition: 
Brand New
Brand New $1,559.00 /Each
$1,668.00 You save $109.00 7%
Manufacturer warranty Description
Tek-Trol, 4300C-01-A-01-A-01-A-01, 90' Range Free Space Radar Level Transmitter
Features:
- East to install as small size antenna.
- Non-contact radar without wear and pollution.
- Hardly affected by corrosion, foam, and changes in water vapor including temperature and pressure in the atmosphere.
- Influence is minimal during serious dust environment.
- Shorter wavelength.
- Better reflection when inclined solid surface.
- Small Beam angle and energy concentrated.
- Enhance the echo ability and avoid interference.
- Smaller measurement blind area.
- High signal-to-noise ratio.
- Can achieve better performance even in the case of fluctuation.
- High frequency is the best choice for measuring solid and low dielectric constant medium.
Applications:
- Solid
- Strong Dew
- Dust
- Crystal
- Corrosive Liquids
Tek-Wave 4300C Free Space Radar Level Transmitter is a 26GHz high-frequency radar type level measuring instrument, which can measure up to 70 meters. The antenna is furthered optimized and the fast microprocessor can carry out signal analysis and processing at a higher rate. Therefore Tek-Wave 4300C Free Space Radar Level Transmitter can be used for some complex measurement conditions such as reactor, solid bin, etc.
Dimensions:
Technical details
Main features
- Beam Angle 18°
- Power Supply 16 to 26VDC
- Accuracy ±3mm
- Measuring Range 90ft (30m)
- Output Signal 4 to 20mA with HART®
- Protection Class IP67
- Electrical Connection 1/2" NPT (Two)
- Process Connection NPT or Flange
- Display LCD
- Power Consumption Max 22.5mA/1w
- Operating Temperature -40 to 212°F (-40 to 100°C)
- Response Time About 1 second (depending on parameter setting)
- Display Resolution 1mm
- Maximum Pressure Max. 580psi (4Mpa)
- Integration time 0 to 50s adjustable
- Medium temperature -40 to 300°F (-40 to 150°C)
- Shock Resistance Mechanical vibration 32.80ft/s2 (10m/s2), (10 to 150) Hz
- Process Temperature -40 to 482°F (-40 to 250°C)
- Terminal Block 18 to 22 AWG Wire
- Microwave frequency 26GHz
- Approval CE
- Process Pressure -14.50 to 580psi (0.1 to 4Mpa)
- Fault Signal Current output unchanged; 20.5ma; 22mA; 3.9mA
- Permissive Ripple - <100Hz Uss - (100 to 100K) Hz Uss
- Blind Area Antenna end
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.