Takex PXB-100SW Detector 300'/660' Low Current Draw Intelligent DBL
Brand:
Takex
Part #:
PXB-100SW
Condition: 
Brand New
Brand New $700.00 /Pair
$949.00 You save $249.00 26%
Manufacturer warranty Description
Features:
- 4 x synchronised high power beams
- low-Current Consumption for battery or solar operation
- 4 selectable beam channels to prevent crosstalk
- double modulation for unsurpassed light immunity
- increased beam separation minimises nuisance alarms
- vivid internal colour aids beam alignment procedure
- lightning and surge protection up to 15kV
- environmental monitoring circuit
- dynamic auto-gain lock (AGL)
- 50,000 lux sunlight immunity
- IP65 housing
Ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.
For more information, please see 
Data Sheet
Technical details
Main features
- Weight Transmitter : 1500g (52.5oz) Receiver : 1550g (54.3oz)
- Power Supply 5 to 30VDC (polarity)
- Functions Modulated beam frequency selection Tone indicator Environmental module Beam power selection Transmitting power adjustment Alarm output selection Environmental output selection Monitor jack Tamper Response time adjustment Upper / Lower beam switch Wireless Checker
- Protection Distance Outdoor 100m (330ft) or less Indoor 200m (660ft) or less
- Alarm Output Dry contact relay output form N.O./N.C switchable Contact action : Interruption time (min. 2 sec) Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
- IP Rating IP65
- Response Time 0.05 sec. to 0.7 sec. (Variable at pot)
- Appearance PC resin (wine red)
- Wiring Terminals
- Detection system Near infrared pulsed beam interruption system (TX-RX 4 beam simultaneous interruption)
- Infrared beam Double modulation pulsed beam by LED
- Max. beam range Outdoor 1000m (3300ft) or less Indoor 1000m (3300ft) or less
- Tamper output Dry contact relay (N.C.) Action : activated when cover is detached Capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor
- Alarm LED Red LED (Receiver) ON : when an alarm is initiated
- Attenuation LED Red LED (Receiver) ON : When beam is attenuated
- Ambient temperature range -35°C to +66°C (-31°F to +151°F)
- Mounting positions Outdoor, Indoor
- Environmental output Dry contact relay output form N.O./N.C. switchable Action : activated when weather condition worsens Capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
- Beam Adjustment Horizontal : ±90° / Vertical : ±20°
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.