SimplyTEST ST-156005 SignalTEK Network Tester with Touchscreen

Features:

• Provide proof of performance to your clients with PDF reports.
• TREND AnyWARE app - Send reports from anywhere.
• Network traffic performance test to IEEE802.3ab standard.
• Cable tracing - Port blink to visually trace cables.
• Displays port ID of LLDP/CDP - Eliminate manual cable tracing.
• Copper cable testing - Wiremap and distance to fault using TDR.
• Fiber cable testing - optical power indication. (SFPs required)
• PoE - Power over Ethernet verification with voltage.

Installation Testing Cabling:

• Network traffic performance test on copper and fiber to IEEE802.3ab standard
• Wiremap test for opens, shorts, miswires, and split pairs to TIA-568 standard
• Gigabit link verification for copper and fiber cabling

Active network:

• Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
• Check Ethernet connectivity at the device location to 10/100/1000 Mb/s
• Verify network configuration (device IP/gateway address/subnet mask)
• Switch port identification via LLDP/CDP protocols

Troubleshooting/diagnostics Cabling:

• Distance to fault using TDR technology (copper only)
• Ability to identify and trace cables with a compatible amplifier probe
• Optical power indication (with compatible SFP modules)

Active network:

• Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
• Stress test the network before installing bandwidth-hungry devices
• Port blink to visually trace cable from work area outlet to network switch
• Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
• Identify network connection problems as hardware, network, or configuration faults
• Ping local network devices and Internet URLs
• Count the number of hops between network points with traceroute tests

Applications:

• SignalTEK NT is used to quickly prove that Ethernet will work correctly after installation in cable installations such as SOHO or residential cabling where cable certification is cost-prohibitive.
• Workstation or Laptop has extremely slow network access. SignalTEK NT can be used to run a simplified transmission test to check network performance.
• A 100Mb/s LAN environment gets upgraded to 1 Gb/s. SignalTEK NT can be used to check if the existing (old) cabling can support up to 1Gb/s Ethernet
• An existing LAN installation gets upgraded to VoIP. SignalTEK NT can be used to check if both the cabling as well as the active components can support VoIP traffic
• After MACs (Moves/Adds/Changes) of active devices, SignalTEK NT can be used to ensure minimum bandwidth requirements are met.
• In industrial Ethernet applications, SignalTEK NT can be used to verify cabling performance to 100Mb/s or Gigabit requirements
• SignalTEK NT can be used to test the throughput of an industrial Ethernet LAN