Senva Sensors CT1D-A3D CT1D CO2, Temp Sensor, LCD, NoTemp
Condition: 
Brand New
Brand NewChoose Temperature
$289.10 /Each
$564.05 You save $274.95 49%
Notification
WARNING: "Senva products may contain BPA or other chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.". For more information go to www.P65Warnings.ca.gov
Manufacturer warranty Description
Features:
- Integrated display and push-button menus for field selectable scale, calibration, and operational modes
- Dual 4-20mA and 0-5V/0-10V output (jumper selectable)
- Integrated high-reliability solid-state set-point relay is ideal for direct control Applications; easy to set up thanks to LCD
- Non-dispersive infrared sensing element (NDIR)
- Field replaceable CO2 sensor
- 15+ year life expectancy on CO2 sensing element
- Selectable auto-calibration mode returns sensor to baseline values
- ±40ppm, ±3% of reading
Applications:
- Controlling ventilation in response to occupancy
- Facilitates compliance with ASHRAE 62.1 standard for air quality
- Offices, conference rooms, and public assembly areas
Self-calibrating NDIR sensor for high accuracy. A built-in LCD display makes set up a snap, and a standard solid-state setpoint relay makes demand ventilation easy. Probe is non-directional for accurate readings and ease of installation. Dual 4-20mA and 0-10/5 vdc outputs.
Technical details
Main features
- Dimensions 4.0‘ h x 4.4"w x 2.1"d (+6.8" probe)
- Power Supply 12-30VDC/24VAC(1), 100mA max.
- Material ABS/Polycarbonate
- Type Non-dispersive Infrared (NDIR)
- Display LCD
- Temperature None, 14 to 122F (-10 to 50C)
- Response Time 60 seconds to 90% reading
- Humidity 0-95% Non-Condensing
- Programmable Solid-state, 1A at 30VAC/DC, N.O.
- SCL, Scaling 0-2000ppm, 0-5000ppm, 0-10000ppm (2000ppm default)
- AdJ, Adjustment Offset adjustment +/-250ppm (0 default)
- rUn, Run Mode Displays CO2 in ppm
- Output scaling 0 - 2000 or 0 - 5000 ppm (selectable)
- Output update rate 1 second
- SPH, Setpoint, Hi (On point) 500ppm to full-scale (800ppm default)
- SPL, Setpoint, Lo (Off point) 400ppm to full-scale-50 (700ppm default)
- CAL, Calibration mode Automatic mode ON or OFF (default=ON)
- Dual Analog 3-wire 4-20mA and 0-5V/0-10V (2) (jumper)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.