TotalSense Sensor OLED Display with Solid Cover

Senva Sensors AQ2W-BDAVPFS TotalSense Sensor OLED Display with Solid Cover

Brand: Senva Sensors

Part #:

AQ2W-BDAVPFS

Model #:

TotalSense

Condition:

Brand New

Notification

WARNING: Senva products may contain BPA or other chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Manufacturer warranty

Description

Senva, AQ2W-BDAVPFS, TotalSense Occupancy Sensor Dual Channel CO2, VOC 10K T3 OLED Display with Solid Cover, Analog Output Type, PM

For more information, please see pdf file Product Data

Features:

Initiate ventilation immediately upon occupancy detection for healthier buildings and energy savings
Sense unhealthy or offensive air with TVOC
Detect a variety of PM sizes to indicate airborne respiratory droplets, allergens, and other dangers
Industry-leading temperature and barometric pressure compensated CO2 sensing with non-dispersive infrared sensing element (NDIR), 15+ year life expectancy on CO2 sensing element; ±30ppm, ±3% of reading
Capacitive touch buttons make setup and use simple
Slim and sleek surface-mount enclosure is tamper-proof and easy to install
Field-replaceable PM, RH, Temp, and CO2 sensors ease maintenance

Aplications:

Verify effectiveness of IAQ strategies in post covid environment
Energy management/building control
Facilitates compliance with ASHRAE 62.1 standard for air quality
Contributes toward satisfying Feature A08 and T06 under the WELL Building Standard®

The TotalSense Series provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. Motion detection (PIR) can initiate ventilation upon occupancy, providing air exchanges the instant people are present, allowing for cleaner and safer indoor spaces while still saving energy.

Product Dimensions

Check availability

Technical details

Main features

Interface 1.5" Natural LED Display, 128x128, color
Dimensions 5.67"h x 3.00"w x 1.07"d (With concealing ring: 6.35"h x 3.69"w x 1.25"d)
Power Supply 24-30VDC/24VAC(1), 4.3W nominal, 5W max.
Material ABS plastic
Scale 0-5V, 0-10V, 4-20mA (switch selectable, programmable per output), 0-1,000 µg/m3, 0-100 fc (lm/ft2), readable over comms
Accuracy ±(30ppm + 3% of reading) (400-2,000ppm), -10-50ºC, 0-85%RH±(50ppm+ 5% of reading) (2,000-5,000ppm), -10-50ºC, 0-85%RH>5,000ppm consult factory, 5% of reading
Output 0-2,000 µg/m3 (default) programmable up to 32,000 µg/m3
Range 0-2,000 PPM (Default) (Programmable up to 10,000ppm), 0-32,000 µg/m3 (Display may be programmed to show PPB)
Quantity Up to 3 outputs
Size Range PM1.0, PM2.5, PM4.0, PM10.0
Temperature Sensor 10k Type 3 Thermistor
CO2 / Humidity Sensor Dual Channel CO2 / without Humidity Sensor
Type Non-dispersive Infrared (NDIR), Phototransistor, Solid-state output, 1A at 30VAC/DC, N.O., Silicon Band-gap, MOS, Optical, Electrochemical
Display OLED / Analog Output Type
Resolution 1 ppm, 0.1° C
Gas Total VOC
PIR Sensor No
Temperature 32 to 122oF (0 to 50oC)
Response Time 60 seconds, 30s, <10s, 90 seconds to 90% reading
Humidity 0-95% Non-Condensing
Sample Rate 1s, 3s
Source CO2, RH%, Temp, Temp slider, TVOC (selectable), CO2 setpoint, RH setpoint, Temp setpoint, TVOC setpoint, PIR motion detection, Air Quality, off (selectable)
Detection Range 0-200 Ppm
Precision ±10 µg/m3 (0-100µg/m3); ±10% (100-1,000 µg/m3)
Nominal Accuracy ±0.3° C (operating range)
Polarity NO/NC (selectable)
Agency CE, RoHS
Temp and Pressure Compensation Yes, barometric pressure readable over comms
Maximum Accuracy (2) ±0.5° C (at 25° C), ±1.0° C
Formaldehyde CH2O Sensitivity Responsive to Formaldehyde concentrations 50-1000 ppb
Accuracy (5) ±20µg/m3 + 15% at 1 to 500µg/m3 (typical)
Lower detection limit 0.3 µm
Long-Term Drift ±1.25 µg/m3 / year
CO2 Sensor Dual Channel CO2