Senva Sensors AQ2W-BC2VPAD TotalSense Occupancy Sensor CO2 OLED Display PM
Brand NewChoose Temperature
Notification
WARNING: Senva products may contain BPA or other chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Manufacturer warranty Description
Senva, AQ2W-BC2VPAD, TotalSense Occupancy Sensor CO2, 2% Relative Humidity, VOC no Tmp OLED Display PM
For more information, please see 
Product Data
Features:
- Initiate ventilation immediately upon occupancy detection for healthier buildings and energy savings
- Sense unhealthy or offensive air with TVOC
- Detect a variety of PM sizes to indicate airborne respiratory droplets, allergens, and other dangers
- Industry-leading temperature and barometric pressure compensated CO2 sensing with non-dispersive infrared sensing element (NDIR), 15+ year life expectancy on CO2 sensing element; ±30ppm, ±3% of reading
- Capacitive touch buttons make setup and use simple
- Slim and sleek surface-mount enclosure is tamper-proof and easy to install
- Field-replaceable PM, RH, Temp, and CO2 sensors ease maintenance
Aplications:
- Verify effectiveness of IAQ strategies in post covid environment
- Energy management/building control
- Facilitates compliance with ASHRAE 62.1 standard for air quality
- Contributes toward satisfying Feature A08 and T06 under the WELL Building Standard®
The TotalSense Series provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. Motion detection (PIR) can initiate ventilation upon occupancy, providing air exchanges the instant people are present, allowing for cleaner and safer indoor spaces while still saving energy.
Technical details
- Interface 1.5" Natural LED Display, 128x128, color
- Dimensions 5.67"h x 3.00"w x 1.07"d (With concealing ring: 6.35"h x 3.69"w x 1.25"d)
- Data Rate 9600, 19200, 38400, 57600, 76800, 115200 (switch selectable)
- Power Supply 24-30VDC/24VAC(1), 4.3W nominal, 5W max.
- Material ABS plastic
- Scale 0-1,000 µg/m3, 0-100 fc (lm/ft2), readable over comms
- Accuracy 5% of reading, ±(30ppm + 3% of reading) (400-2,000ppm), ±(50ppm+ 5% of reading) (2,000-5,000ppm), +/-2% over 0 to 80%RH range, ±15% of FS at 20°C
- Range 0-2,000 PPM (Default) (Programmable up to 10,000ppm)
- Protocol BACnet MS/TP or Modbus RTU
- Size Range PM1.0, PM2.5, PM4.0, PM10.0
- CO2 / Humidity Sensor without CO2 / 2% RH
- Type Digital CMOS, Non-dispersive Infrared (NDIR), Phototransistor, Passive Infrared, Solid-state output, 1A at 30VAC/DC, N.O., Optical, Electrochemical, PMOS
- Display OLED / BACnet MSTP / Modbus RTU
- Resolution 1 ppm, 0.05%RH
- Connection 3-wire RS-485, with isolated ground
- PIR Sensor No
- Temperature 32 to 122°F (0 to 50°C)
- Response Time 60 seconds, 30s, 90 seconds to 90% reading
- Humidity 0-95% Non-Condensing
- Sample Rate 1s, 3s
- Operating Conditions -4 to 140oF (-20 to 60°C) at RH>90%; -4 to 176oF at RH=50%
- Source CO2 setpoint, RH setpoint, Temp setpoint, TVOC setpoint, PIR motion detection, Air Quality, off
- Detection Range 0-200 Ppm
- Operating Range 0 to 100%RH (non-condensing)
- Precision ±10 µg/m3 (0-100 µg/m3); ±10% (100-1,000 µg/m3)
- Axis X field of view 140°, 15 ft (4.5m)
- Axis Y field of view 76°, 15 ft (4.5m)
- Address Range 0-127
- Polarity NO/NC (selectable)
- Agency CE, RoHS
- Temp and Pressure Compensation Yes, barometric pressure readable over comms
- Lower detection limit 0.3 µm
- Long-Term Drift ±1.25 µg/m3 / year
- Ozone Detection Range 20-500 ppb
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.