Senva Sensors AQ2W-BA2AAARC TotalSense Indoor Sensor, BACnet / Modbus, Ring

Brand: Senva Sensors

Part #:

AQ2W-BA2AAARC

Model #:

TotalSense

Condition:

Brand New

Notification

warning WARNING: Senva products may contain BPA or other chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Manufacturer warranty

Description

Senva, AQ2W-BA2AAARC, TotalSense Indoor Environmental and Air Quality Sensor, BACnet / Modbus, 2% Relative Humidity, Air Quality Ring, 1k Ω SP Slider

Features:

Reduce installation costs with multiple sensors in a standard size enclosure
Initiate ventilation immediately upon occupancy detection for healthier buildings and energy savings
Detect a variety of PM sizes to indicate airborne respiratory droplets, allergens, and other dangers
The slim and sleek surface-mount enclosure is tamper-proof and easy to install
RH (Relative Humidity) Monitor humidity - regulating humidity levels ensures occupant comfort and may minimize risk of spreading pathogens (field replaceable)
Field-replaceable sensors ease maintenance
Comprehensive data
Integrated set-point relay (programmable)
Set-point sliders and pushbuttons meet the requirements for any job
Air Quality Ring provides occupants assurance without confusing metrics
Green/yellow/red
Air Quality Ring for tenant assurance (programmable)

Applications:

Verify the effectiveness of IAQ strategies in post covid environment
Energy management/building control
Facilitates compliance with ASHRAE 62.1 standard for air quality
Contributes toward satisfying Feature A08 and T06 under the Well Building Standard

The TotalSense Indoor Environmental and Air Quality Sensor provides more data for more advanced ventilation control while drastically reducing installation cost and time on a project. It's more than an IAQ sensor, it's the first fully configurable Indoor Environmental Quality (IEQ) sensor matrix. Ambient Light Adjust lighting levels based on natural light for energy savings.

Check availability

Technical details

Main features

Interface Color changing (red / yellow / green) LED Air Quality Ring
Data Rate 9600, 19200, 38400, 57600, 76800, 115200 (switch selectable)
Power Supply 16-30VDC / 24VAC(1), 3.5W nominal, 4W max.
Material ABS plastic
Accuracy 2% models, +/-2% over 0 to 80% RH range
Protocol BACnet MS/TP or Modbus RTU
Accessories 1k Ω SP Slider
Type Digital CMOS
Display Air Quality Ring
Resolution 0.05% RH
Output Type BACnet MSTP / Modbus RTU
Connection 3-wire RS-485, with isolated ground
Temperature Output No Temperature Output
Operating Temperature 32 to 122°F (0 to 50°C)
Operating Humidity 0-95% Non-Condensing
Response Time 30 s
Sample Rate 3 s
Operating Conditions -4 to 140°F (-20 to 60° C) at RH>90%; -4 to 176°F at RH=50%
Operating Range 0 to 100% RH (non-condensing)
Ambient Light Type Phototransistor
Ambient Light Scale 0-100 fc (lm / ft2), readable over comms
Address Range 0-127
Accuracy with PR Sensor ±5% accuracy over 0 to 80% RH range