SeaMetrics WMP101-100 WMP-Series Plastic Bodied Magmeter, 1"
Brand NewChoose Model
Manufacturer warranty Description
The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring application in 1 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is light weight and easy to install or remove from the pipe for inspection.
With no moving parts, the magmeter permits unobstructed flow, minimizing flow disturbances and straight pipe requirements. The WMP-Series can be used in piping configurations where there is little space between the meter and an elbow or valve. The WMP-Series is resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, maintenance and repair costs are kept to a minimum and it tolerates high flows without damage.
Is externally powered via a 5-pin connector cable (20ft/6m) which also provides pulse output for use with a variety of Seametrics and other displays and controls for remote reading, data logging, pulse-toanalog conversion, and telemetry applications.
Features:
- No moving parts
- Minimal straight pipe required
- Battery powered
- Corrosion resistant
- Built-in rate & total indicator
- Simple as a mechanical meter
Technical details
- Size 1"
- Model External Power
- Power 10-30 Vdc at 60 mA maximum (15 mA average) Note: Using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation.
- Pressure 150 psi or 10.3 bar working pressure at 70° F
- Body Glass-filled polypropylene
- Accuracy ±1% of reading (between 10% and 100% of maximum flow) ±3% of reading (between cutoff and 10% of maximum flow)
- Units Gallons/Minute, Million Gallons/Day Cubic Feet/Second Cubic Feet/Minute Liters/Second, Liters/Minute Million Liters/Day, Cubic Meters/Minute Cubic Meters/Hour
- Electrical Connection 5-pin male circular connector, mates to industry standard cable
- Pulse Rate 1 unit/pulse out, pulse width of 10 ms, depending on unit selection
- Security Cross-drilled screws and tamper-evident seal (optional)
- Operating Temperature Range Operating: 10° to 130° F (-12° to 54° C), Non-operating: -40° to 176° F (-40° to 80° C)
- Environmental NEMA 3X, IP64
- Maximum 110 gpm (6.94 l/s)
- Fitting 1 inch NPT
- 6 8
- Conductivity >20 microSiemens/cm
- Electrodes 316 Stainless Steel
- Pipe Sizes 1" full port
- Electronics Housing Power coated diecast aluminum
- Empty Pipe Detection Hardware/software, conductivity based
- Minimum 2.3 gpm (0.145 l/s)
- Display Cover Polyethylene
- Pulse Output Signal Current sinking pulse, opto-isolated, 32 Vdc maximum at 10mA maximum
- High Frequency (-HF) Pulse width 1.1 ms, min-max frequency, 3-150 Hz
- Pulse/Gal 80
- Pulse/Liter 21.14
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.