SeaMetrics EX813S Fixed Depth Insertion Magmeter, 316 SS, 1"-3"
Brand:
SeaMetrics
Part #:
EX813S
Condition: 
Brand New
Brand NewChoose Material
$1,784.00 /Each
$1,882.00 You save $98.00 5%
Manufacturer warranty Description
Insertion electromagnetic flowmeter are designed for use with conductive liquid in 1 to 12" pipe.
Is highly suitable for difficult applications with changing viscosities and pulsating flows, such as air-driven diaphragm pumps. With no moving parts, these meters can be used in "dirty water" applications where debris would foul a mechanical meter.
Features:
- Electronics Module, Cover and Data Logger (Optional)
- Housing Screw (connect ground wire to one)
- Cable Gland Strain Relief
- Powder-Coated Cast Aluminum Housing
- Retaining Slot (for U-Clip) (for easy installation at correct depth setting)
- O-Ring, EPDM (Viton® optional)
- Sensor Body (Stainless, Brass, PVC)
- PVDF Electrode Cap
- Hastelloy Electrodes
Technical details
Main features
- Cable Standard 18' (6m), #22 shielded twisted pair, 4-conn. Max. cable run at 24 Vdc = 1000' (300m); at 12 Vdc = 500' (150m). For other circumstances, contact the factory
- Material 316 Stainless Steel
- Accuracy ± 1% of full scale
- Output Square wave pulse, opto-isolated, 500 Hz at 20 ft/sec
- O-Ring EPDM (Viton®)
- Pipe Size 1" - 3"
- Housing Powder-coated cast aluminum
- Description Externally powered sensor (12 - 24Vdc) with FT430 rate and total indicator (with pulse outputs) mounted on the sensor.
- Environmental See meter mounted electronic specification for rating
- Maximum Pressure 20 microSiemens/cm
- Stainless Steel 200 psi (14 bar)
- Fluid 32° to 200° F (0° to 93° C)
- Low Power 12 - 24 Vdc, 40mA average with 250mA peaks
- Flow Velocity 0.28 to 20 ft/sec (0.08 - 6.09 m/sec)
- Empty Pipe Detection Software, defaults to zero flow
- Sensor Body 316 Stainless Steel
- Electrode Cap PVDF (Kynar®)
- Full Power 12 - 24 Vdc, 250mA
- Ambient 0° to 160° F (-17° to 72° C)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.