Buy Seametrics EX159S, Hot Tap, Insertion Electro Magnetic Sensor, 316 SS

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Material:: Material: 316 Stainless
Includes Package:: Includes Package: Externally Powered Sensor with FT440 Rate and Total Ondicator
Pipe Size:: Pipe Size: Hot Tap 3"-10"

Adjustable depth insertion magmeter that fit 3" to 48" pipe. The complete lack of moving parts is the source of its reliability. Brass models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out. Like all magmeters, when used in chemical injection applications, this meter should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fluids before the meter).

Features:

No moving parts
Durable
Adjustable depth
Brass

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Pipe Size	Hot Tap 3" - 10"
Power
Sensor Full Power	12 - 24 Vdc, 250mA
Low Power	12 - 24 Vdc, 40mA average with 250mA peaks
Materials
Housing	Powder-coated cast aluminum
Tubing/Fitting/Sensor Housing	316 Stainless Steel
Electrodes	Hastelloy
Electrode Cap	PVDF
O-Ring	EPDM
Valve Assembly	Bronze with bronze ball valve
Fitting Size Required
11x/21x	1.5" FNPT
15x/25x	2" FNPT
Maximum Pressure	200 psi (14 bar)
Temperature
Ambient	0° to 160° F (-17° to 72° C)
Fluid	32° to 200° F (0° to 93° C)
Minimum Conductivity	20 microSiemens/cm
Flow Velocity	0.28 - 20 ft/sec (0.08 - 6.09 m/sec)
Accuracy	± 1% of full scale
Output	Square wave pulse, opto-isolated, 500 Hz at 20 ft/sec 6 mA max, 30Vdc forward flow standard; reverse flow optional
Empty Pipe Detection	Software, defaults to zero flow
Cable	Standard 18' (6m), #22 shielded twisted pair, 4-conn. Max. cable run at 24 Vdc = 1000' (300m); at 12 Vdc = 500' (150m). For other circumstances, contact the factory
Environmental	See meter mounted electronic specification for rating
Description	Externally powered sensor (12 - 24Vdc) with FT440 rate and total indicator (with pulse and 4-20mA outputs) mounted on the sensor.

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Pipe Size	Hot Tap 3" - 10"
Power
Sensor Full Power	12 - 24 Vdc, 250mA
Low Power	12 - 24 Vdc, 40mA average with 250mA peaks
Materials
Housing	Powder-coated cast aluminum
Tubing/Fitting/Sensor Housing	316 Stainless Steel
Electrodes	Hastelloy
Electrode Cap	PVDF
O-Ring	EPDM
Valve Assembly	Bronze with bronze ball valve
Fitting Size Required
11x/21x	1.5" FNPT
15x/25x	2" FNPT
Maximum Pressure	200 psi (14 bar)
Temperature
Ambient	0° to 160° F (-17° to 72° C)
Fluid	32° to 200° F (0° to 93° C)
Minimum Conductivity	20 microSiemens/cm
Flow Velocity	0.28 - 20 ft/sec (0.08 - 6.09 m/sec)
Accuracy	± 1% of full scale
Output	Square wave pulse, opto-isolated, 500 Hz at 20 ft/sec 6 mA max, 30Vdc forward flow standard; reverse flow optional
Empty Pipe Detection	Software, defaults to zero flow
Cable	Standard 18' (6m), #22 shielded twisted pair, 4-conn. Max. cable run at 24 Vdc = 1000' (300m); at 12 Vdc = 500' (150m). For other circumstances, contact the factory
Environmental	See meter mounted electronic specification for rating
Description	Externally powered sensor (12 - 24Vdc) with FT440 rate and total indicator (with pulse and 4-20mA outputs) mounted on the sensor.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Seametrics EX159S Hot Tap, Insertion Electro Magnetic Sensor, 316 SS

Identifiers

Technical Details

Reviews