Moxa MGate 5118 J1939 to PROFINET/EtherNet/IP Gateway
Brand New
Manufacturer warranty Description
Moxa, MGate 5118, 1-Port SAE J1939 to Modbus/PROFINET/EtherNet/IP Gateway
Features:
- Converts J1939 to Modbus, PROFINET, or EtherNet/IP
- Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Supports EtherNet/IP Adapter
- Supports PROFINET IO device
- Supports J1939 protocol
- Effortless configuration via web-based wizard
- Built-in Ethernet cascading for easy wiring
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- microSD card for configuration backup/duplication and event logs
- Status monitoring and fault protection for easy maintenance
- CAN bus and serial port with 2 kV isolation protection
- Security features based on IEC 62443
The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 gateways support the conversion of J1939 data to Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.
Key-in-Free J1939 Command
The J1939 protocol is designed to retrieve a wide range of data from CAN-J1939 devices. To eliminate the need to key in all J1939 commands into the gateway by hand, MGate 5118 gateways can auto detect the output commands used by the CAN device.
With a single Cli-ck in the web console, all of the output commands from your CAN device will be detected by the gateway automatically. The commands will be displayed in the web console's command list, and then can be further modified by the user if needed. The MGate 5118 gateways make it much easier for users to connect PLCs with CAN devices.
A Variety of Maintenance Functions
The MGate 5118 gateways support a web console for easy configuration and maintenance, and the built-in traffic monitor function monitors J1939 protocol traffic, allowing users to monitor the status of connected CAN devices, including error count, packet count, and bus-offline. The traffic monitor function can also be used to troubleshoot CAN devices. The diagnostics tool helps users to check CAN device settings and indicates CAN device availability by reading the J1939 network address. In addition, the MGate 5118 gateways have a built-in Live List function for when two or more J1939 devices are connected to the same CAN bus. This function shows the PGN and address of packets transmitted from each device, giving users the ability to gage the loading of the CAN bus.
To detect loose cables, the MGate 5118 gateways support status monitoring and fault protection functions. The status monitoring function notifies a PLC when the cable between the gateway and CAN device is loose. In addition, the fault protection function executes actions predefined by the user when the cable between the gateway and PLC is loose.
Technical details
- Configuration Serial Console, Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
- Connector DB9 Male, Spring-type Euroblock terminal
- Mode Master, Slave, Client (Master), Server (Slave), Scanner, Adapter, IO Device
- Weight 589 g (1.30 lb)
- Dimensions 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
- Input Voltage 12 to 48 VDC
- Standards Telcordia SR332
- Number of Ports 1
- Version SAE J1939 to Modbus/PROFINET/EtherNet/IP
- Housing Metal
- Baud Rate 50 bps to 921.6 kbps, 250 Kbps, 500 Kbps, 1 Mbps
- Operating Temperature 0 to 60°C (32 to 140°F)
- Power Connector Spring-type Euroblock terminal
- IP Rating IP30
- Vibration IEC 60068-2-6, IEC 60068-2-64
- Shock IEC 60068-2-27
- EMC EN 61000-6-2/-6-4
- Safety EN 62368-1, UL 61010-2-201
- Input Current 416 mA at 12 VDC
- Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
- Isolation 2 kV, 2 kV (built-in)
- Flow Control RTS Toggle (RS-232 only), RTS/CTS, Flow Control
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Hazardous Locations ATEX, Class I Division 2, IECEx
- Parity None, Even, Odd, Space, Mark
- Stop Bits 1, 2
- Mib RFC1213, RFC1317
- Time 727,873 hrs
- Data Bits 7, 8
- Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
- EMI CISPR 32, FCC Part 15B Class A
- EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV ; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m ; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV ; IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV ; IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m ; IEC 61000-4-8 PFMF
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Encryption HTTPS, AES-128, AES-256, SHA-256
- Freefall IEC 60068-2-32
- Serial Standards RS-232/422/485
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- 10/100BaseT(X) Ports (RJ45 Connector) 2
- Magnetic Isolation Protection 1.5 kV (built-in)
- Industrial Protocols Modbus TCP Client (Master), Modbus TCP Server (Slave), PROFINET IO Device, EtherNet/IP Scanner, EtherNet/IP Adapter, J1939, Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, J1939
- Maximum Number of Client Connections 16
- Contact Current Rating Resistive load: 2 A at 30 VDC
- Authentication Local database
- Security Protocols SNMPv3 SNMPv2c Trap HTTPS (TLS 1.3)
- Time Management NTP Client
- Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485 120 ohms
- Maximum Number of Server Connections 32
- Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23
- Maximum Number of Commands 256, 128
- Terminator 120 ohms
- Maximum Number of Scanner Connections 1 (for read-only), 1 (for read/write)
- Input Data Size 2048 bytes, 496 bytes, 512 bytes
- Output Data Size 2048 bytes, 496 bytes, 512 bytes
- CIP Objects Supported Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
- Maximum Number of Adapter Connections 4
- microSD Slot Up to 32 GB (SD 2.0 compatible)
- Maximum Number of IO Controller Connections 1 (for read/write)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.