Moxa MGate 5103 Modbus/EtherNet/IP to PROFINET Gateway
Brand New
Manufacturer warranty Description
Moxa, MGate 5103, 1-Port Modbus/EtherNet/IP to PROFINET Gateway
Features:
- Converts Modbus, or EtherNet/IP to PROFINET
- Supports PROFINET IO device
- Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Supports EtherNet/IP Adapter
- Effortless configuration via web-based wizard
- Built-in Ethernet cascading for easy wiring
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- microSD card for configuration backup/duplication and event logs
- Status monitoring and fault protection for easy maintenance
- Serial port with 2 kV isolation protection
- Supports redundant dual DC power inputs and 1 relay output
- Security features based on IEC 62443
The MGate 5103 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices.
Easy Configuration via Web Console
The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML files can be imported into PROFINET PLCs to save time on PLC configuration.
Modbus RTU/ASCII/TCP Protocol Traffic Monitor
MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly, or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
Maintenance Functions
MGate 5103 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators.
Technical details
- Configuration Serial Console, Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
- Connector DB9 Male
- Mode Adapter, Master, Slave, Client (Master), Server (Slave), IO Device
- Weight 507 g (1.12 lb)
- Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
- Input Voltage 12 to 48 VDC
- Standards Telcordia SR332
- Number of Ports 1
- Version Modbus/EtherNet/IP to PROFINET Gateway
- Housing Metal
- Baud Rate 50 bps to 921.6 kbps
- Operating Temperature 0 to 60°C (32 to 140°F)
- Power Connector Screw-fastened Euroblock terminal
- IP Rating IP30
- Vibration IEC 60068-2-6, IEC 60068-2-64
- Shock IEC 60068-2-27
- EMC EN 55032/24
- Safety EN 60950-1, UL 508
- Input Current 455 mA at 12 VDC
- Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
- Isolation 2 kV (built-in)
- Flow Control RTS Toggle (RS-232 only), RTS/CTS
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Hazardous Locations ATEX, Class I Division 2, IECEx
- Parity None, Even, Odd, Space, Mark
- Stop Bits 1, 2
- Mib RFC1213, RFC1317
- Time 859,422 hrs
- Data Bits 7, 8
- Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
- EMI CISPR 32, FCC Part 15B Class B
- EMS IEC 61000-4-2 ESD: Contact: 8 kV Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m Signal: 10 V/m IEC 61000-4-8 PFMF
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Encryption HTTPS, AES-128, AES-256, SHA-256
- Freefall IEC 60068-2-32
- Serial Standards RS-232/422/485
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- 10/100BaseT(X) Ports (RJ45 Connector) 2xAuto MDI/MDI-X connection
- Magnetic Isolation Protection 1.5 kV (built-in)
- Industrial Protocols Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, PROFINET IO Device, Modbus TCP Client (Master), Modbus TCP Server (Slave), EtherNet/IP Adapter
- Maximum Number of Client Connections 16
- Contact Current Rating Resistive load: 2 A at 30 VDC
- Authentication Local database
- Security Protocols SNMPv3 SNMPv2c Trap HTTPS (TLS 1.3)
- Time Management NTP Client
- Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485 120 ohms
- RS-485 Data Direction Control ADDC (automatic data direction control)
- Maximum Number of Server Connections 32
- Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23
- Maximum Number of Commands 128
- Maximum Number of Scanner Connections 1 (for read-only), 1 (for read/write)
- Input Data Size 496 bytes, 512 bytes
- Output Data Size 496 bytes, 512 bytes
- CIP Objects Supported Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
- microSD Slot Up to 32 GB (SD 2.0 compatible)
- Maximum Number of IO Controller Connections 1 (for read/write)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.