Jensen Transformers CI-RJ2R-SET Iso-Max RCA to Cat5 TX/RX Extender

Brand: Jensen Transformers

Part #:

CI-RJ2R-SET

Model #:

Iso-Max

Condition:

Brand New

Discontinued

Manufacturer warranty

Description

Jensen Transformers, CI-RJ2R-SET, Iso-Max 2-Channel RCA to Cat5 TX/RX Extender

CI-RJ2R-SET Includes Only:

CI-RJ2R-T Transmitter
CI-RJ2R-R Receiver

Features:

Stereo, analog audio baluns set with RCA inputs/outputs-includes receiver and transmitter modules
Extend audio signal up to 328'
Ethernet RJ45 connectors-compatible with standard Cat5 or Cat6 balanced twisted pair Ethernet cable
Two Jensen high-performance transformers inside the receiver module
Eliminates hum and buzz caused by ground loops and magnetic fields
Rejects noise by as much as 124 dB
Flat frequency response from 5 Hz to 20 kHz
Handles signals in excess of +19 dBv at 20 Hz, without discernible distortion
Rugged steel enclosures fitted with screw-down flanges for easy installation in racks, under shelves, or for attaching to cabinetry
Plug-and-play, easy to use, no power required

The Iso-Max CI-RJ2R's receiver features a pair of high-performance Jensen transformers, which isolate the input of the connected device and reduce common-mode noise by up to 124 dB. The set delivers a flat frequency response from 5 Hz to 20 kHz, and can withstand signals in excess of +19 dBv at 20 Hz, without discernible distortion.

Easy to set up with no power required, the Iso-Max CI-RJ2R features RCA input/output connectors and RJ45 connectors that are compatible with standard Cat5 or Cat6 Ethernet cables. The units are equipped with a rugged steel enclosure fitted with screw-down flanges for easy installation in racks or for mounting under shelves and cabinetry.

Discontinued

Technical details

Main features

Channels 2
Connectors Transmitter: 2 x RCA, female, unbalanced (inputs) 1 x Ethernet RJ45 (output) 1 x Ethernet RJ45 (expand) Receiver: 2 x RCA, female, unbalanced (outputs 1 x Ethernet RJ45 (input) 1 x Ethernet RJ45 (expand)
Dimensions 4.32 x 2.6 x 1.45" / 109.7 x 66.0 x 36.8 mm, each
Frequency Response 5 Hz to 20 kHz
Type Passive interface
Temperature Range 32 to 158°F / 0 to 70°C (Operation or storage)
Output Impedance 1 kHz: Typical: 5.3 kOhms
Input Impedance Zi, 1 kHz, -10 dBV: Typical: 22 kOhms
Maximum Input Level 1% THD: Minimum: +14 dBV Typical: +17 dBV
Voltage Gain 1 kHz, -10 dBV: Minimum: -2.0 dB Typical: -3.0 dB Maximum: -1 dB
Common Mode Rejection Ratio 60 Hz: Typical: 115 dB 3 kHz Minimum: 80 dB Typical: 90 dB
Distortion (THD) 1 kHz, +2 dBV: Typical: < 0.001% 20 Hz, +2 dBV Typical: 0.04% Maximum: 0.10%
Magnitude Response 20 Hz, -10 dBV: Minimum: -0.15 dB Typical: -0.03 dB Maximum: ± 0.0 dB 20 kHz, -10 dBV Minimum: -0.35 dB Typical: -0.20 dB Maximum: ± 0.0 dB
Deviation from Linear Phase 20 Hz to 20 kHz, -10 dBV: Typical: +1.4 / -0° Maximum: ± 2.0°
Optimal Cable Length 25' / 8 m (375 pF): Typical: 0 dB 50' / 15 m (750 pF) Typical: 0 dB 100' / 30 m (1.5 nF) Typical: -0.2 dB 250' / 80 m (3.75 nF) Typical: -1.0 dB 350' / 100 m (5.25 nF) Typical: -1.7 dB (Cable length effect on 20 kHz response in dB, cable at 15 pF per foot)
Voltage Difference Minimum: 250 V RMS (Transmitter-to-receiver ground references, 60 Hz, 1-minute test duration)