IFM TW2003 Infrared 30 - 300 Degrees Temperature Sensor
Condition: 
Brand New
Brand NewChoose Measuring Range (Degrees)
$1,561.00 /Each
Manufacturer warranty Description
Features:
- Reliable, non-contact temperature measurement of objects in a lower and medium temperature range
- Suited for many different applications, such as cooling or heating
- Intuitive setting of analog output and switching output via pushbutton
- Clearly visible display for showing the current temperature
- Robust housing and scratch-resistant precision lens
Applications
- Asphalt
- Coated metal
- Liquids
- Glass
- Rubber
- Rubber
- Wood
- Ceramics
- Plastics
- Lacquers
- Food products
- Paper
- Fabric
For more information, please see 
Data Sheet
Technical details
Main features
- Material Threaded sleeve: stainless steel (1.4305 / 303); polYester
- Application Asphalt; coated metal; liquids; glass; rubber; wood; ceramics; plastics; lacquers; food products; paper; fabric
- Output Signal Switching signal; analog signal; IO-Link; (configurable)
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 1
- Output Function Normally open / closed; (configurable)
- Measuring Range (Degrees) 30 - 300
- Electrical Design PNP
- Protection IP 65
- Housing Threaded type
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 18 - 32 DC; (to SELV/PELV)
- Reverse Polarity Protection Yes
- Current Consumption [mA] < 50
- Minimum Insulation Resistance [MΩ ] 100; (50 V DC)
- Analog Current Output [mA] 4 - 20
- Maximum Load [Ω ] 500
- Ambient Temperature [° C] 0 - 65
- Storage Temperature [° C] -20 - 80
- Maximum Relative Air Humidity [%] 95; (non condensing)
- Weight [g] 342.2
- Number of Inputs and Outputs Number of Digital Outputs: 1 Number of Analog Outputs: 1
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Maximum Voltage Drop Switching Output DC [V] 2.5
- Dimensions [mm] M30 X 1.5
- Power-on Delay Time [s] < 1
- Short-circuit proof Yes
- Adjustment of the switch point Programming buttons
- Permanent Current Rating of Switching Output DC [mA] 150
- Accuracy [K] < ± 1 %; (of measured value, min. 2 K (degree of emission = 1, T = 23 ° C))
- Parameter Setting Analog range; normally open / closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 16
- Process Data Binary 1
- Minimum Process Cycle Time [ms] 3.6
- Type of Short-Circuit Protection Yes (non-latching)
- Thread Designation M30 X 1.5
- Response Time [ms] 100
- Repeatability [K] 1
- Resolution of switching output [K] 0.5
- Resolution of Analog Output [K] 0.2; (+ 0.03 % of the set measuring span)
- Resolution of display [K] 0.5
- Test input Type 3 (IEC 61131-2)
- Wave length range [μ m] 8 - 14
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.