IFM SM2004 Magnetic-Inductive 80 - 9510 gph Flow Meter
Brand New
Manufacturer warranty Description
Features:
- Precise measurement of flow, consumption and medium temperature
- High accuracy, repeatability and measurement dynamics
- For use in water cooling circuits
- With two precise analog outputs
- Clearly visible numerical display
Applications
- Empty pipe detection
- Totalizer function
- For industrial applications
Magnetic flow meters, commonly known as magmeters, utilize the principles outlined in Faraday's law of induction to accurately measure the flow of conductive liquids in various industrial settings.
Magnetic-Inductive Principle of Operation
The magnetic-inductive, or magmeter, measuring principle operates according to Faraday's law of induction. Faraday's principle predicts how a magnetic field will react when a voltage is induced in the field.
When a conductive medium flows through a pipe in a magnetic field, the charged particles from the conductive media are directed to an electrode on one side based on the flow direction. Depending on the flow velocity, more or fewer charge carriers are led past the electrode, generating a voltage proportional to the flow velocity or volumetric flow quantity. The voltage is tapped via the measuring electrodes and converted in the evaluation electronics to a usable control signal. As the pipe cross-section is defined, the volumetric flow quantity can be determined exactly.
Farady's Law and Magmeters
When a conductive fluid moves through the magmeter's magnetic field, it induces a voltage. This voltage can then be measured to determine the flow rate of the fluid. Electrodes within the magmeter tap into this voltage. It's then converted within the device's electronics to give a usable control signal that tells us the flow rate of the fluid.
Not every fluid can work with a magmeter. The fluid must be conductive for the device to measure its flow rate. The more conductive the medium, the clearer the reading. Thus, they work was as water flow meters among other liquids.
For more information, please see 
Data Sheet
Technical details
- Material Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U
- Application Empty pipe detection; for industrial applications
- System Gold-plated contacts
- Output Signal Analog signal
- Protection Class III
- Installation Connection to pipe by means of an adapter
- Process Connection Threaded connection G 2 DN50 flat seal
- Measuring Range (gph) 80 - 9510
- Protection IP 65 IP 67
- Repeatability ± 0,2% MEW
- Operating voltage [V] 18 - 32 DC; (to SELV/PELV)
- Media Conductive liquids; water; water-based media
- Temperature Drift ± 0,0333 ° C / K; ± 0,0599 ° F / K
- Reverse Polarity Protection Yes
- Current Consumption [mA] < 150
- Analog Current Output [mA] 4 - 20; (≤ 22 mA; scalable)
- Maximum Load [Ω ] 500
- MTTF [Years] 85
- Weight [g] 3147
- Number of Inputs and Outputs Number of Analog Outputs: 2
- Total Number of Outputs 2
- Number of Analog Outputs 2
- Pressure Equipment Directive Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
- Materials (Wetted Parts) Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; NBR fiber-reinforced; FKM
- Pressure rating [psi] 232
- Power-on Delay Time [s] 5
- Response Time [s] 0.35; (dAP = 0)
- Pressure Rating [bar] 16
- Pressure Rating [MPa] 1.6
- MAWP (for Applications According to CRN) [bar] 16
- Measuring dynamics 1: 120
- Accuracy (in the Measuring Range) ± (0,8 % MW + 0,5 % MEW)
- Accuracy [K] ± 1 (25 ° C; Q>15 l/min) / ± 1 (77 ° F; Q>4 gpm)
- Damping Process Value dAP [s] 0 - 5
- Dynamic Response T05 / T09 [s] T09 = 3 (Q>15 l/min) / T09 = 3 (Q>4 gpm)
- Parameter Setting Display can be deactivated; Display Unit; empty pipe detection
- Display Unit L/min; m³/h; gpm; gph; ° C; ° F
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.