| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Measuring range [scfh] | 25 - 7945 |
| Measuring range [scfm] | 0.4 - 132.4 |
| Measuring range [ft/s] | 1.2 - 340.2 |
| Process Connection | Threaded connection 1" NPT DN25 |
| Media | Compressed air |
| Medium Temperature [° C] | -10 - 60 |
| Min. bursting pressure [psi] | 928 |
| Pressure rating [psi] | 232 |
| MAWP (for Applications According to CRN) [bar] | 10.5 |
| Electrical Data |
| Operating Voltage [V] | 18 - 30 DC; (to SELV/PELV) |
| Current Consumption [mA] | < 80 |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Power-on Delay Time [s] | 1 |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Inputs |
| Inputs | Counter reset |
| Outputs |
| Output Signal | Switching signal; analog signal; pulse signal; IO-Link; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2.5 |
| Permanent Current Rating of Switching Output DC [mA] | 150; (per output) |
| Number of Analog Outputs | 1 |
| Analog Current Output [mA] | 4 - 20; (scalable) |
| Maximum Load [Ω ] | 500 |
| Pulse output | Consumed quantity meter |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Overload Protection | Yes |
| Measuring/Setting Range |
| Measuring range [scfh] | 25 - 7945 |
| Measuring range [scfm] | 0.4 - 132.4 |
| Measuring range [ft/s] | 1.2 - 340.2 |
| Display range [scfh] | 0 - 9535 |
| Display range [scfm] | 0 - 158.9 |
| Display range [ft/s] | 0 - 408.2 |
| Resolution [scfh] | 5 |
| Resolution [scfm] | 0.1 |
| Resolution [ft/s] | 0.2 |
| Set point SP [scfh] | 69 - 7943 |
| Set point SP [scfm] | 1.1 - 132.4 |
| Set point SP [ft/s] | 3 - 340.1 |
| Reset point rP [scfh] | 30 - 7904 |
| Reset point rP [scfm] | 0.5 - 131.7 |
| Reset point rP [ft/s] | 1.3 - 338.4 |
| Analog start point ASP [scfh] | 0 - 6357 |
| Analog start point ASP [scfm] | 0 - 105.9 |
| Analog start point ASP [ft/s] | 0 - 272.2 |
| Analog end point AEP [scfh] | 1589 - 7946 |
| Analog end point AEP [scfm] | 26.5 - 132.4 |
| Analog end point AEP [ft/s] | 68 - 340.2 |
| Low flow cut-off LFC [scfh] | 9 - 85 |
| Low flow cut-off LFC [scfm] | 0.2 - 1.4 |
| Low flow cut-off LFC [ft/s] | 0.4 - 3.6 |
| In steps of [scfh] | 1 |
| In steps of [scfm] | 0.1 |
| In steps of [ft/s] | 0.1 |
| Pressure monitoring |
| Measuring range [psi] | -15 - 232 |
| Display range [psi] | -15 - 290 |
| Resolution [psi] | 1 |
| Set point SP [psi] | -13 - 232 |
| Reset point rP [psi] | -15 - 231 |
| Analog start point [psi] | -15 - 186 |
| Analog end point [psi] | 32 - 232 |
| In steps of [psi] | 1 |
| Volumetric flow quantity monitoring |
| Pulse length [s] | 0.007 - 2 |
| Accuracy / Deviations |
| Temperature Coefficient [1/K] | ± 0,07 % MW |
| Accuracy (in the Measuring Range) | Class 141: ± (2 % MW + 0,5 % MEW); class 344: ± (6 % MW + 0,6 % MEW) ; air quality to ISO 8573-1: 2010; at medium temperature 73 ° F |
| Repeatability | ± (0,4 % MW + 0,1 % MEW) |
| Pressure monitoring |
| Repeatability [% of the final value] | ± 0,2 |
| Characteristics deviation [% of the final value] | < ± 0,5; (BFSL = Best Fit Straight Line) |
| Greatest TEMPCO of the span [% MEW / 10 K] | ± 0,3 |
| Greatest TEMPCO of the zero point [% MEW / 10 K] | ± 0,1 |
| Temperature Monitoring |
| Accuracy [K] | ± 0,5; (medium flow in the limit area of the flow measurement range) |
| Reaction Times |
| Response Time [s] | 0.1; (dAP = 0) |
| Damping Process Value dAP [s] | 0 - 5 |
| Pressure monitoring |
| Response Time [s] | 0.05 |
| Temperature Monitoring |
| Dynamic Response T05 / T09 [s] | T09 = 0,5 |
| Software / Programming |
| Parameter Setting | Hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display Unit; totalizer |
| Interfaces |
| Communication Interface | IO-Link |
| Transmission Type | COM2 (38,4 kBaud) |
| IO-Link Revision | 1.1 |
| SDCI Standard | IEC 61131-9 CDV |
| Profiles | Digital Measuring Sensor (0x800A), Identification and Diagnosis (0x4000) |
| SIO Mode | Yes |
| Required Master Port Class | A |
| Process Data Analog | 8 |
| Process Data Binary | 2 |
| Minimum Process Cycle Time [ms] | 7.2 |
| Operating Conditions |
| Ambient Temperature [° F] | 32 - 140 |
| Storage Temperature [° C] | -4 - 185 |
| Maximum Relative Air Humidity [%] | 90 |
| Protection | |
| MTTF [Years] | 183 |
| Pressure Equipment Directive | Sound engineering practice; can be used for stable gases fluid group 2 |
| Mechanical Data |
| Weight [g] | 1581 |
| Material | PBT+PC-GF30; PPS GF40; stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); steel (1.5523) galvanized; 2.0401 (brass / CW614N); FKM |
| Materials (Wetted Parts) | Stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); FKM; ceramics glass passivated; PPS GF40; Al2O3 (ceramics); acrylate |
| Process Connection | Threaded connection 1" NPT DN25 |
| Electrical Connection |
| Connection | Connector: 1 x M12; coding: A |
