| Subject to the use of all the optional accessories |
| Maximum voltage with 10:1 or 100:1 probe | 1000 V |
| Maximum resolution with 10:1 or 100:1 probe | 1 mV |
| Full scale reading | 999 counts |
| Accuracy at 4 s to 10 us/div | +/-(3 % + 6 counts) |
| Maximum voltage with 10:1 or 100:1 probe | 1000 V |
| Maximum resolution with 10:1 or 100:1 probe | 1 mV |
| Full scale reading | 999 counts |
| 50 Hz | +/-(3 % + 10 counts) - 0.6 % |
| 60 Hz | +/-(3 % + 10 counts) - 0.4 % |
| 60 Hz to 20 kHz | +/-(4 % + 15 counts) |
| 20 kHz to 1 MHz | +/-(6 % + 20 counts) |
| 1 MHz to 25 MHz | +/-(10 % + 20 counts) |
| Maximum voltage with 10:1 or 100:1 probe | 1000 V |
| Maximum resolution with 10:1 or 100:1 probe | 1 mV |
| Full scale reading | 1100 counts |
| DC to 60 Hz | +/-(3 % + 10 counts) |
| 60 Hz to 20 kHz | +/-(4 % + 15 counts) |
| 20 kHz to 1 MHz | +/-(6 % + 20 counts) |
| 1 MHz to 25 MHz | +/-(10 % + 20 counts) |
| Purpose | To measure on pulse width modulated signals, like motor drive inverter outputs |
| Principle | Readings show the effective voltage based on the average value of samples over a whole number of periods of the fundamental frequency |
| Accuracy | As Vac+dc for sinewave signals |
| Modes | Max peak, min peak, or pk-to-pk |
| Maximum voltage with 10:1 or 100:1 probe | 1000 V |
| Maximum resolution with 10:1 or 100:1 probe | 10 mV |
| Max peak, min peak | +/-0.2 division |
| Pk-to-pk | +/-0.4 division |
| Full scale reading | 800 counts |
| Ranges | Same as V ac, Vac+dc or V peak |
| Scale Factors | 0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A, 50mV/A, 100 mV/A, 200 mV/A, 400 mV/A |
| Accuracy | Same as Vac, Vac+dc or V peak (add current clamp accuracy) |
| Range | 1.000 Hz to 500 MHz |
| Full scale reading | 999 counts |
| Accuracy | +/-(0.5 % + 2 counts) |
| Voltage probe | 1:1, 10:1, 100:1, 1000:1, 20:1, 200:1 |
| Current clamp | 0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A, 50 mV/A, 100 mV/A, 200 mV/A, 400 mV/A |
| Shaft voltage probe | 1:1, 10:1, 100:1 |