Fluke FLUKE-116/62MAX+ Digital HVAC Multimeter with Thermometer

Brand: Fluke

Part #:

FLUKE-116/62MAX+

Condition:

Brand New

Choose Included

Multimeter Multimeter / Clamp Meter Multimeter / Infrared Thermometer

Check availability

Manufacturer warranty

Description

FLUKE-116/62MAX+ Includes Only:

116 HVAC Multimeter with Temperature and Microamps
62 MAX+ Infrared Thermometer

Features:

Built-in thermometer for HVAC applications
Microamps to test flame sensors
Low input impedance helps prevent false readings due to ghost voltage
Work in poorly lit areas with the Large white LED backlit display
True-rms voltage and current for accurate measurements on non-linear loads
Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
Resistance, continuity, frequency and capacitance
Record signal fluctuations using Min/Max/Average and elapsed time stamps
Easy to use with one hand
CAT III 600 V safety rated
Measure -30 °C to 650 °C (-22 °F to 1202 °F)
Extremely accurate: up to +1.0 °C or + 1.0% of reaching (Fluke 62 MAX+)
IP54 rating for water resistance and dust proof allow to work rain or shine and even in the most dirty or dusty industrial sites
Strong enough to withstand a 3m drop. No worry even if work from a ladder
Small and lightweight; clips to tool belt or belt loop or easily fits into tool box
Dual lasers: The 62 MAX+ has dual lasers to help identify area to be measured

Having the right tool for the job is essential. Having all the right tools when need them is even better. The HVAC Combo Kit gives the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.

It comes with the integrated DMM temperature probe. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. It also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.

This multimeters are independently tested for safe use in CAT III 600V environments.

This infrared thermometer is everything had want in toolbox. Small in size, extremely accurate and yet easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.

Together, the HVAC Multimeter and Infrared Thermometer give HVAC technicians the right tools for the job.

For more information, please see Data Sheet

Check availability

Technical details

Main features

Battery 9 V alkaline, NEDA 1604A/IEC 6LR61
Included Multimeter / Infrared Thermometer
Display Digital: 6,000 counts, updates 4/sec
Operating Temperature 14 to 122°F (-10 to 50°C)
Storage Temperature -40 to 140°F (-40 to 60°C)
Battery Life 400 hours typical, without backlight
Surge Protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Capacitance Range: 1000, nF, 10, 100, 9999, 100 to 1000, >1000 µF Resolution: 1 nF, 0.01, 0.1, 1 µF Accuracy: 0.9 % + 2, 1.9 % + 2, 5 % + 20
Continuity Range: 600 Ω Resolution: 1 Ω Accuracy: Beeper on <20 Ω off> 250 Ω; detects opens or shorts of 500 µs or longer
Diode Test Range: 2.000 V Resolution: 0.001 V Accuracy: 0.9 % + 2
DC Millivolts Range: 600.0 mV Resolution: 0.1 mV Accuracy: 0.5 % + 2
DC Volts Range: 6, 60, 600 V Resolution: 0.001, 0.01, 0.1 V Accuracy: 0.5 % + 2
Auto Volts Range: 600.0 V Resolution: 0.1 V Accuracy: 2.0 % + 3 (dc, 45 to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC Millivolts True RMS Range: 600.0 mV Resolution: 0.1 V Accuracy: 1.0 % + 3 (dc, 45 to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC Volts True RMS Range: 6, 60, 600 V Resolution: 0.001, 0.01, 0.1 V Accuracy: 1.0 % + 3 (dc, 45 to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Ohms Range: 600 Ω, 6, 60, 600 kΩ, 6, 40 MΩ Resolution: 1 Ω, 0.001, 0.01, 0.1 kΩ, 0.001, 0.01 MΩ Accuracy: 0.9 % + 1
Maximum Voltage Between Any Terminal and Earth Ground 600 V
Bar Graph 33 segments, updates 32/sec
Lo-Z Capacitance Range: 1 nF to 500µF Accuracy: 10 % + 2 typical
Temperature (Type-K Thermocouple) Range: -40 to 752 °F (-40 to 400 °C) Resolution: 0.2 °F (0.1°C) Accuracy: 1 % + 18
AC µAmps True RMS (45 to 500 Hz) Range: 600.0 µA Resolution: 0.1 µA Accuracy: 1.5 % + 3 (2.5 % + 3 >500 Hz
DC µAmps Range: 600.0 µA Resolution: 0.1 µA Accuracy: 1.0 % + 2
Hz (V or A input) Range: 99.99, 999.9 Hz, 9.999, 50.00 kHz Resolution: 0.01, 0.1 Hz, 0.001, 0.01 kHz Accuracy: 0.1 % + 2