Fluke FL62MAX+/323/1AC IR Thermometer and Voltage Detector Kit
Brand:
Fluke
Part #:
FL62MAX+/323/1AC
Condition: 
Brand New
Brand New $454.00 /Kit
Notification
This product will be drop-shipped directly from the manufacturer. We will provide you with the manufacturer's lead time once advised.
Manufacturer warranty Description
Fluke, FL62MAX+/323/1AC, IR Thermometer, Clamp Meter and Voltage Detector Kit
FL62MAX+/323/1AC Includes Only:
- IR Thermometer
- Clamp Meter
- Voltage Detector
- Case
Features of IR Thermometer:
- Small in size. Big on toughness.
- Dust and water-resistant: IP54 rated.
- Rugged: 3-meter (9.8-foot) drop tested.
- Ergonomically designed: Completely redesigned for a more natural hand fit.
- Distance to spot: 12:1.
- Dual lasers: Identifies area to be measured.
- Large, backlit display: Makes data easier to read, even in dark areas.
Features of Clamp Meter:
- Rugged. Reliable. Precise.
- 400 A AC current measurement.
- 600 VAC and DC voltage measurement.
- True RMS AC voltage and current for accurate measurements on non-linear signals.
- Resistance measurement up to 40 kΩ with continuity detection.
- Slim, ergonomic design.
- CAT IV 300V/CAT III 600 V safety rating.
Features of Voltage Detector:
- Voltbeat™ technology and continuous self-test, so always know it's working.
- Upon detection, tip glows and beeper sounds.
- Voltage detection of 90 to 1000 VAC.
- CAT IV 1000 V for added protection.
Features of Soft Case:
- Lightweight soft case to provide optimal protection and accessory storage.
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem.
Technical details
Main features
- Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
- Power AA Battery
- Weight 255 g (8.99 oz), 265 g
- Accuracy ±1.0°C or ±1.0% of reading, whichever is greater -10°C to 0°C: ±2.0 -30°C to -10°C: ±3.0, 2% ±5 digits (45 Hz to 65 Hz) 2.5% ±5 digits (65 Hz to 400 Hz), 1.5% ±5 digits, 1.0% ±5 digits
- Range 400.0 A, 600.0 V, 400.0 Ω/ 4000 Ω
- Light Source One high-intensity red LED
- Temperature Range -30°C to 650°C (-22°F to 1202°F)
- Operating Temperature -10°C to 50°C, 0°C to 50°C (32°F to 122°F)
- Storage Temperature -20°C to 60°C (-4°F to 140°F), (without battery)
- Operating Humidity 10% to 90% RH non-condensing at 30°C (86°F)
- IP Rating IP 40, IP 54 per IEC 60529
- Operating Altitude 3000 meters, 2000 meters above mean sea level
- EMC EN 61326-1:2006 EN 61326-2:2006
- Battery Life 8 hours with laser and backlight on
- Agency Approvals CSA, CE, C-Tick
- Optical Resolution 12:1 (calculated at 90% energy)
- Drop Test 3 Meters
- Storage altitude 12,000 meters above mean sea level
- Operating Principle Senses the steady state electrostatic field produced by ac voltage through the insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicate the presence of voltage.
- Batteries 2 AAA alkaline batteries included
- Operating Humidity Ranges 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40°C to 55°C)
- H x W x D (mm) 207 x 75 x 34
- Display Resolution 0.1°C (0.2°F)
- Safety Rating 1000 V, CAT IV
- Continuity ≤ 70 Ω
- Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
- Data Hold Yes
- AC response True-RMS
- Max wire diameter 30 mm (600 MCM)
- Category rating CAT III 600 V CAT IV 300 V
- Repeatability of readings ±0.5% of reading or < ±0.5°C (1°F), whichever is greater
- Voltage sensing ranges Nominally, 90 VAC to 1000 VAC or 200 VAC to 1000 VAC, depending on model, 45 Hz to 405 Hz; also, a 20 V to 90 V control circuit model
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.