Crowcon TP-AAAGZZZZ-A-001-A Triple Plus+ 2 Gas Detector, Pumped
Condition: 
Brand New
Brand NewChoose Gas
Choose Type
$2,052.00 /Kit
$2,592.00 You save $540.00 21%
Manufacturer warranty Description
Crowcon, TP-AAAGZZZZ-A-001-A, Triple Plus+ Portable 2 Gas Detector, Methane, Oxygen, Pumped, Li-ion Battery, English, ATEX
TP-AAAGZZZZ-A-001-B Includes Only:
- Gas Monitor
- Manual
- Additional flow plate
- 2m hose
- Pouch
- Shoulder strap
- Allen keys
Features:
- Piercing 85dB Alarm At 1m - gives you confidence in the status of your Triple Plus+, and the environment you're working in
- Vivid LED Alarms with Top Visibility
- Confidence Blip, Low Battery and TWA Warnings
- Timed Data Logging with 100-hour capacity
- Wide Range of Electrochemical Oxygen and Toxic Gas Sensors - allows you to create your optimum 4 gas Triple plus+
- Interchangeable Sensor Modules
- Comprehensive Data Logging with site and user names
- TriaxTM Casing Will Not Crack Or Shatter When Dropped - system integrity and operation assured
- Unique Internal Design Will Resist The Harshest Treatment
- Full Buoyancy - makes recovery from water possible
- Simple WindowsTM Software Interface - user menus allow calibration with or without connecting to a PC
- QuickCal For Rapid Calibration
Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards. Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including a selection of flammable gas correction factors (so one unit can be used in several locations across a site).
Exploded Diagram:
- Socket cap screw for lid fixing, M4 x 12 - M03572
- Battery cover gasket - M04652
- LIBRA lithium-ion battery pack for TRP+/IR initially fitted with lead-acid batteries - C01006
- Display molding assembly - S011152
- 'D' ring for strap - M04218
- Membrane switch Triple Plus+ - E01753
- Socket cap screw for case fixing, M4 x 25 - M03583
- Triple Plus+ complete molding set, non-pumped - S011148
- Socket cap screw for lid fixing, M4 x 12 - M03572
- Pump assembly - S011184
- Flow plate assembly - C01280
Technical details
Main features
- Size 118 x 200 x 73mm (4.65 x 7.8 x 2.9ins)
- Weight 880g gas (31oz)
- Approvals ATEX II 2G: Ex ib d IIC T4 Gb Ta -20°C to +50°C
- Battery Rechargeable Li-ion battery pack 10 hours Charging: Dual rate drop-in charger; Dual rate charger/PC interface
- Calibration Tetra can be routinely calibrated manually using the menu, using Crowcon Portables PC software.
- Range Methane: 0-100% vol Oxygen: 0-25% vol
- Type Pumped
- Display 2 lines of 24 characters, dot matrix high contrast LCD with backlight operating for 30 minutes Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels Low battery, pump failure, real-time and elapsed time, calibration, and configuration data also displayed
- Gas Methane / Oxygen
- Operating Temperature -20°C to +50°C (-4°F to 122°F)
- Ingress protection IP65
- Humidity 20 to 90% RH non-condensing
- Alarms Piercing, rapid intermittent, piezo-electric tone 85 dB at 1 m Confidence blip (selectable) Distinctive double blip for low battery with user accept Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: a distinctive double flash of green LED
- Standard Alarm Methane: N/A Oxygen: 19/23.5% vol
- Data Logging Adjustable sample rate, 100 hours at 1-minute sample rate (maximum 6000 data points per channel), logging of events, user and site
- Typical Response Times Methane 20s (Triple Plus+) IR 20s (Triple Plus+IR), Oxygen 10s, typical Toxic Gas 20s
- Sampling Optional internal electric pump with on/off button
- Safety Standards EN50014, EN50020, EN50018-2, EN50270, EN50082-2
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.