Altelix, NS282416VFA1C-20A-R6U, 28" x 24" x 16" 120VAC 20A Steel NEMA Enclosure for UPS Power Systems with 19" Wide 6U Rack, Dual Cooling Fans, 20A Power Outlets and Power Cord
NS282416VFA1C-20A-R6U Includes Only:
- Weatherproof Enclosure
- 19" 6U Rack Frame and Blank Zinc Coated Galvanized Steel Equipment Mounting Plate
- Aluminum Bottle Opener Key
- Accessory kit
Features:
- A deeper size accommodates equipment with front-facing ports
- Dual Thermostat Controlled Cooling Fans
- (4) 120VAC 20A Outlets
- Pre-Wired 20A Power Cord with 3-Prong Plug
- Heavy Duty Continuous Seam Welded 18 Gauge Steel Construction
- Dual quarter-turn door latches with key
- Epoxy polyester textured light gray powder coat finish
- NEMA Type 4, 4X / IP66 Rated
Applications:
- 19" Rack Mountable UPS Power Systems
- Indoor / Outdoor 20A Electrical and Electronic Equipment
- Rack Mountable 20A Audio/Video Equipment
- Ethernet Switches
- Networking Equipment
- Industrial Controls and Components
- Security and Surveillance Systems
- Outdoor use of Indoor Equipment
- Protection of Equipment from Theft or Damage
The 19" Rack 6U Steel Fan Cooled Weatherproof NEMA Enclosure with 120VAC 20A Power and Equipment Plate is ideal for protecting rack mountable UPS power systems as well as other 20A electronic equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
Construction and Features
This rugged enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door and enclosure.
The enclosure and door are finished in a rugged epoxy polyester textured light gray powder coat finish.
120VAC 20A Removable Power and Fan Module
The NS282416VFA1C-20A-R6U features a removable power and fan module that attaches to the bottom of the enclosure. Constructed of rugged aluminum, this can be easily removed for servicing and is fully gasketed to ensure a proper seal. This power module features two pre-wired duplex 120VAC 20A power outlets (4 outlets total) and a pre-wired 20A 5-foot power cord with a 3-prong plug, so no additional wiring is required.
Dual Cooling Fans Ventilation
This enclosure features dual 3" vents and dual thermostat-controlled cooling fans. The low-noise, high-airflow fans help maintain lower internal temperatures by allowing air to be either pushed or pulled through the enclosure. The fans turn on when the internal temperature reaches 100°F (38°C) and turn off when it drops to 79°F (26°C). Both fans are wired internally so they do not require the use of the AC outlets leaving them for internal equipment use.
Galvanized Steel Equipment Plate
This configuration consists of the steel NEMA enclosure with a hinged door and an 18-gauge (1.2mm thick) zinc-coated galvanized steel plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
Internal 6U 19" Equipment Rack
The NS282416VFA1C-20A-R6U features a standard 19" 6U equipment rack. It is designed to accommodate a wide range of equipment such as network switches, rack-mount audio/video equipment and most other rack-mountable equipment. The rack frame mounts to an 18-gauge (1.2mm thick) galvanized steel plate which can also be drilled and modified by the installer to unique site requirements.
Installation Note: This 6U rack has an adjustable depth from 9.5" (241.3mm) to 15.5" (393.7mm). Before ordering please check the dimensions of the equipment to be installed to ensure proper fit.
Cable Glands
The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Mounting
Mounting holes are provided inside the enclosure for mounting to a wall or other structure.
