Alderon, PPMDS2X1X1, Power Post Monitoring, Demand Dose, Outdoor Alarm, 240VAC, Alarm Float, 2.0" Riser Connection Kit
Features:
- (1) Power On Indicator - Green LEDs illuminate to indicate the unit is powered on. Note: Disable LED indicators in system settings
- (2) Alarm Beacon - Alarm LEDs (various colors) illuminate, flashing.
- (3) Pump Run Indicator - Blue LEDs illuminate to indicate a pump run event. Note: Disable LED indicators in system settings.
- (4) System LED Indicators - Multiple color indicators illuminate for both system events and/or alarm conditions.
- (5) OLED Display Screen - Displays system functions.
- (6) Menu Keypad - Toggle between system functions, program settings, or view all lifetime data stored.
- (7) Test/Silence Pushbutton - Quick access to lifetime pump run event counter statistic, test or silence the alarm, or exit the menu system.
- (8) Alarm Buzzer - Annunciates to indicate an alarm event.
- (9) Alarm "Dry" Contacts - Interface with an external device such as a standard or WiFi indoor alarm. The contacts (normally open) are rated 24VDC/120VAC, 500mA maximum.
- (10) Quick Snap Terminal Blocks - A pair of four-position terminal blocks for system power, pump power, alarm or control switches, and filter switch.
- (11) Vented Post Cap - Allows airflow to prevent the build up of gases and condensation inside the post.
- (12) QR Code (not shown) - Scan code for product information.
- (13) Cable Grips - Pre-installed, creates a liquid and gas tight strain relief connection when securely fastened.
- (14) Pump Power Receptacle (not shown) - A female, 15A, pump power receptacle is pre-installed.
- (15) Post - Provides wire routing access for system power and pump power while protecting from water intrusion.
Use the Power Post™ Monitoring Demand System to make a professional and safe connection for power and float switch wiring connections to your on-site septic system. The Power Post™ comes with a 42.5-inch post to install in the ground with the vented post cap, cable grips, and junction box all pre-installed to the post which eliminates a 4" x 4" wood post and the exposed wires for a safe, clean, and quick installation. This system can be used for a wide variety of applications, including but not limited to: septic tanks, holding tanks, pump chambers, and water tanks. Model include 240VAC.
The Power Post™ Monitoring Demand System has an integrated outdoor alarm equipped with LED indicators (various colors), buzzer, and test/silence pushbutton. The top of the enclosure changes color along with system function displayed text on the OLED screen for easy troubleshooting information. Menu keys are provided to program settings and view data such as: pump cycle counts, pump amps, elapsed time, total gallons pumped, alarm conditions and more.
The system includes terminals to connect a high level alarm float switch and filter switch. Use the auxiliary alarms for monitoring high liquid level and service of the effluent filter.
For more information, please see 
Data Sheet and Quick Start Guide
