Alderon, 8059, Outdoor Remote Pump Station Alarm, Type 4X (Alarm Panel Only)
Features:
- (1) Enclosure - Thermoplastic, rated Type 4X (outdoor).
- (2) Alarm Indicator - The red LED alarm indicator will illuminate on the front of the alarm panel.
- (3) Alarm Buzzer - The alarm buzzer will annunciate in addition to the visual indication provided by the red LED during an alarm condition.
- (4) Alarm Silence Pushbutton - Press the pushbutton to silence the buzzer during an alarm condition. The alarm LED remains illuminated and auxiliary contacts activated until the alarm condition has been cleared.
- (5) Auxiliary Contacts Relay - Wired to the terminal block on the alarm panel to control the auxiliary contacts signal received from the main control panel.
- (6) Alarm Silence Relay - Wired to the terminal block on the alarm panel to control the audible indication during an alarm condition.
- (7) Fuse - Included to protect internal wiring, fast acting type AGC, and rated at 1 Amp, 250VAC maximum.
- (8) Terminal Block - Field installed wiring is connected to the terminal block on the alarm panel, labeled for easy installation. Terminals 1 and 2 are for the alarm auxiliary contacts, rated at 120VAC, 5 Amps maximum. Terminals 5 and 6 are for the incoming power (L1 and N), rated at 120VAC, 60 Hz.
- (9) Ground Lug - Connect ground wires to the lug.
- (10) Lockable Latches - Securely fasten the cover of the alarm panel enclosure using the latches. Each latch includes a slot to padlock the alarm panel from unwanted entry.
- (11) Mounting Feet - Located on the top and bottom of the alarm panel enclosure to securely fasten in the desired location.
The Outdoor Remote Pump Station Alarm is an outdoor rated alarm panel and connected to either dry or 120VAC powered contacts from a pump station main control panel.
The Outdoor Remote Pump Station Alarm Panel is activated from the main control panels dry contacts (must be rated for 120VAC, 1 Amp minimum) or 120VAC powered alarm signal. Use the auxiliary contacts to connect to building automation systems (BAS) and phone dialers.
When a signal is received from the main control panel, the red LED alarm indicator will illuminate, buzzer will annunciate, and the auxiliary contacts will activate. If the alarm silence pushbutton is pressed during an alarm condition, it will silence the buzzer while the alarm indicator and auxiliary contacts remain activated.
The silence condition will reset when a signal from the main control panel deactivates, indicating the alarm condition has been cleared. The alarm indicator and auxiliary contacts deactivate, and the alarm panel will auto reset for the next alarm cycle.
For more information, please see Data Sheet and Quick Start Guide