Alderon 2012012 Monitoring System, 2.0" Riser Connection Kit

Alderon, 2012012, Power Post PPMTS1X11X1 Monitoring System, Pump Connection Center, Timed / Demand Dose, Integrated Alarm, 120VAC, Alarm Float, 20' Wide Angle Control Float, 2.0" Riser Connection Kit (replaces PPCP122X1)

Features:

• Power On Indicator - Green LEDs will illuminate inside the top cover of the enclosure to indicate that the unit is powered on.
• Alarm Beacon - During an alarm condition, the green power-on indicator will turn off, and alarm LEDs (various colors) will illuminate, flashing inside the top cover of the enclosure.
• Pump Run Indicator - When the pump is running under normal conditions, the blue LED indicator will illuminate inside the top cover of the enclosure. Note: The pump run LED indicators can be disabled in system settings.
• System LED Indicators - Multiple color indicators will illuminate inside the top cover of the enclosure for visual indication of various system events and/or alarm conditions.
• OLED Display Screen - Displays system functions in addition to the visual indication provided by the LED indicators inside the top cover of the enclosure.
• Menu Keypad - Toggle between the system functions, program settings, or view all lifetime data stored.
• Test/Silence Pushbutton - Used for quick access to the lifetime pump run event counter statistic, test or silence the alarm, or exit the menu system. The system MUST be in an idle state (solid green LEDs) to perform testing. When pressed, the event statistic is displayed, then the alarm LEDs will cycle between red, green, blue, and off before TESTING BUZZER is displayed with an audible buzzer sound. During an alarm condition, it will silence the buzzer and the alarm LEDs will continue to flash during an alarm event.
• Alarm Buzzer - The alarm buzzer will annunciate in addition to the visual indication provided by the LEDs inside the top cover of the enclosure during an alarm condition.
• Quick Snap Terminal Blocks - One six-position and a pair of two-position terminal blocks are included to make fast and easy connections for: system power, pump power, alarm or control switches, and filter switch.
• Alarm "Dry" Contacts - One set of auxiliary contact terminals are included, allowing the alarm to interface with an external device such as a standard or WiFi alarm. The contacts are rated for 24VDC at 500mA maximum, normally open - fail-safe closed.
• Control Relay - Controls current through the pump circuit and is removable, ideal for systems with high usage environments.
• Vented Post Cap - Allows airflow to prevent the buildup of gases and condensation inside the post.
• Cable Grips - Pre-installed, making it easy to run wire in and out of the enclosure. The grips create a liquid and gas-tight strain relief connection when securely fastened.
• Pump Power Receptacle - A female, 15A, pump power receptacle is pre-installed.
• Post - Provides wire routing access for system power, pump power, float switch, and sensor cables while protecting from water intrusion.

Use the Power Post™ Monitoring Systems to make a professional and safe connection for power and float switch wiring connections to your on-site septic system. The Power Post™ comes with a 42.5-inch post to install in the ground with the vented post cap, cable grips, and junction box all pre-installed to the post, which eliminates a 4" x 4" wood post and the exposed wires for a safe, clean, and quick installation. This system can be used for a wide variety of applications, including but not limited to: mound systems, pressurized drain fields, or any system requiring timed or demand dose pumping and monitoring.

The Power Post™ Monitoring System has an integrated outdoor alarm equipped with LED indicators (various colors), buzzer, and test/silence pushbutton. The top of the enclosure changes color along with system function displayed text on the OLED screen for easy troubleshooting information. Menu keys are provided to program settings and view data such as: pump cycle counts, pump amps, elapsed time, total gallons pumped, pump dosing events, alarm conditions and more.

The system can be equipped with an optional Power Post™ indoor alarm panel (standard or WiFi) to connect a high-level alarm float switch, and/or filter switch for remote notification of high-level and filter service alarm conditions. A customer-supplied sensor wire is used to make connections between the terminals on the remote alarm panel and the Power Post™ enclosure.