Alderon 2012006 Pump Connection Center, 2.0" Riser Connection Kit

Alderon, 2012006, Power Post SPPD1X1X4 Pump Connection Center, Demand Dose, Integrated Alarm, 120VAC, Alarm Float, 2.0" Riser Connection Kit with Access Panel

Features:

• Power On Indicator - Green LEDs illuminate the top cover of theenclosure to indicate the power is on.
• Alarm Beacon - Red LEDs will illuminate, flashing inside the top coverof the enclosure.
• Vented Post Cap - Allows airflow to prevent the buildup of gases and condensation inside the post.
• Alarm Buzzer - Annunciates in addition to the visual indication provided by the red LEDs during an alarm condition.
• Test/Silence Pushbutton - This button is used to either test or silence the alarm. Testing will activate the alarm beacon and buzzer. During an alarm condition, it will silence the buzzer, and the red LEDs will stop flashing and turn solid.
• Sensor Input - Terminals for the high-level alarm float switch.
• Auxiliary Contacts - Interface with an external device. The contacts are rated for 24VDC at 0.5A maximum.
• Alarm Power - Terminals for L1 and N to install alarm power.
• WAGO Connectors - Pre-installed to the female power receptacle to terminate the pump power connections.
• Power Indicator Turn Off - Flip the switch down to turn off green power LEDs. Reverse the process to turn power indicators back on, flip the switch up.
• QR Code (not shown) - Scan code for product information.
• Cable Grips - Pre-installed, create a liquid and gas-tight strain relief connection when securely fastened.
• Pump Power Receptacle - A female, 15A, pump power, receptacle is pre-installed.
• Post - Provides wire routing access for system power and pump powerwhile protecting from water intrusion.

Use the Power Post™ to make a professional and safe connection for power andfloat switch wiring connections to your on-site septic system. The Power Post™comes with a 42.5-inch post to install in the ground with the vented post cap,cable grips, and junction box all pre-installed to the post which eliminates a 4" x4" wood post and the exposed wires. This system can be used for a wide varietyof applications, including but not limited to: septic tanks, holding tanks, pumpchambers, and water tanks.

The Power Post™ allows for a safe, clean, and quick installation of pump power,pump float switch, high level alarm float switch, and is equipped with audible andvisual alarm indication. There are several float switch and accessory optionsincluding an optional Power Post™ indoor alarm panel (standard or WiFi) forremote notification of alarm conditions.

When powered, the green LED will illuminate inside the top cover of theenclosure to indicate the unit is powered on. During an alarm condition,the red LEDs will illuminate, flashing and the buzzer will annunciate. Thealarm condition will stay on until the alarm float switch is deactivated. If thetest/silence pushbutton is pressed during an alarm condition, it will silence thebuzzer and the red LEDs will stop flashing and turn solid. The silence conditionwill reset when the alarm float switch deactivates. If the alarm is in silence modefor longer than 24 hours, the alarm will reactivate.

For more information, please see Data Sheet