ASD/QMS 200-27M-QC2000 SmartCable Gage Interface, Metronics QC-2000

Advanced Systems & Designs, 200-27M-QC2000, SmartCable Gage Interface for Metronics QC-2000 with Digimatic Output

This Advanced Systems & Designs SmartCable™ with Digimatic Output is a single gage interface cable that connects to older RS232 output GageMux® multiple input gage interface, or other devices that recognizes the Mitutoyo Digimatic format. The Advanced Systems & Designs SmartCable™ is engineered to convert the data format from the Metronics Quadra-Chek QC2000 or 3000 digital readout inspection display to a Digimatic output so it can communicate with your SPC software package.

Output:

• 1. DIP Switch 1 selects X coordinate transmission ON (down) or OFF (UP)
• 2. DIP Switch 2 selects Y coordinate transmission ON (down) or OFF (UP)
• 3. DIP Switch 3 selects "inches" units when OFF (up) or "mm" ON (down)
• (Example for X coordinate only, set DIP Switch 1 ON and DIP Switch 2 OFF)

Operation Instructions:

Connect the SmartCable™ to the RS232 GageMux® interface and the Metronics Quadra-Chek QC-2000 digital readout. Make sure all equipment is powered on and configured correctly. Press reset on the RS232 GageMux® gage interface to initialize ports, wait for all lights to flash on the GageMux®, then press reset on the SmartCable to initialize communications with the QC-2000.