Buy ACI 143946, Explosion Proof, Smart Sensor, Carbon Monoxide, 0-1000 PPM

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Gas Type:: Gas Type: Carbon Monoxide

ACI (Automation Components), Q8-CO-1000P-O-X, 143946, Explosion Proof, Smart Sensor, Carbon Monoxide, 0-1000 PPM, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU

The Q8 Series of Explosion Proof Gas Detectors are used in applications that require a rugged enclosure that meets the Class 1 Division 1 requirements. Each unit comes standard with an integral clock, digital display of concentration, relay status, STEL, TWA, and peak daily values of the gas being detected. A three color backlight will flash depending on the level of alarm for operator safety. Setup and calibration is accomplished through non-intrusive magnetic switches that allow for programming of all parameters.

Applications:

Mechanical Rooms, Warehouses, Refrigeration Plants, Industrial Plants, Process Monitoring, Leak Detection, Parking Garages, Auto/Truck Maintenance Facilities, Oil and Gas Industry

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Notifications

Notifications Item is non-returnable unless defective.
Please review our Return Policy.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

Supply Voltage [Q8]	VDC Supply Voltage: 24 VDC nominal (+18 to 30 VDC) VAC Supply Voltage: 24 VAC nominal (+15 to 24 VAC, AC Power must not be grounded)
Q8 Communication Baud Rates	1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 76800 Bits/Second (Default 4800
Display	LCD Graphic Display with backlight (Displays TWA, STEL and PEAK Daily Value)
Keypad	Three (Non-Intrusive) Magnetic Switches
Relays / Contact Type / Relay Contact Ratings	Three, SPDT (Form 1C) Dry Contact rated 1.0A max. at 30 VDC or 0.3A max. at 125 VAC (Resistive Load)
Status LEDs	Two Green LED's (Tx/Rx Communication Status), Three Red LED's (Relays 1, 2 & 3 Status)
Sensor Warm-Up Time	24 Hours (Allow 24 hours before calibrating sensor after initial installation)
Gas Type	Combustible and Toxic Gases/Oxygen Sensor
Fuse Protection	0.750A Polyswitch; (Automatically resets after fault is cleared & power to circuit is removed)
Supply Current / Power Consumption	0.3A maximum / 8.4 VA
Analog Output Signals (Q8 Only)	4-20 mA, 1-5 VDC or 2-10 VDC (4-Wire Power, Power Ground, Output Signal, Output Signal Common)
Enclosure	Standard Wall Mount Enclosure
Gas Span Code	CO-1000P
Gas Type	Carbon Monoxide
Measurement Range	0-1000 PPM
Operating Temp °F (°C)	-4 to 122 (-20 to 50)
Square Feet ft2 (m2)	7500 (696.7)
Radius ft (m)	49 (14.9)
Mounting Height	Mid

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Supply Voltage [Q8]	VDC Supply Voltage: 24 VDC nominal (+18 to 30 VDC) VAC Supply Voltage: 24 VAC nominal (+15 to 24 VAC, AC Power must not be grounded)
Q8 Communication Baud Rates	1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 76800 Bits/Second (Default 4800
Display	LCD Graphic Display with backlight (Displays TWA, STEL and PEAK Daily Value)
Keypad	Three (Non-Intrusive) Magnetic Switches
Relays / Contact Type / Relay Contact Ratings	Three, SPDT (Form 1C) Dry Contact rated 1.0A max. at 30 VDC or 0.3A max. at 125 VAC (Resistive Load)
Status LEDs	Two Green LED's (Tx/Rx Communication Status), Three Red LED's (Relays 1, 2 & 3 Status)
Sensor Warm-Up Time	24 Hours (Allow 24 hours before calibrating sensor after initial installation)
Gas Type	Combustible and Toxic Gases/Oxygen Sensor
Fuse Protection	0.750A Polyswitch; (Automatically resets after fault is cleared & power to circuit is removed)
Supply Current / Power Consumption	0.3A maximum / 8.4 VA
Analog Output Signals (Q8 Only)	4-20 mA, 1-5 VDC or 2-10 VDC (4-Wire Power, Power Ground, Output Signal, Output Signal Common)
Enclosure	Standard Wall Mount Enclosure
Gas Span Code	CO-1000P
Gas Type	Carbon Monoxide
Measurement Range	0-1000 PPM
Operating Temp °F (°C)	-4 to 122 (-20 to 50)
Square Feet ft2 (m2)	7500 (696.7)
Radius ft (m)	49 (14.9)
Mounting Height	Mid

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

ACI 143946 Explosion Proof, Smart Sensor, Carbon Monoxide, 0-1000 PPM

Identifiers

Options and Related Products

Technical Details

Reviews