| Warm Up Time / Warm Up Drift | 10 Minutes / +/- 0.1% |
| Operating / Storage Temperature | -40 to 185°F (-40 to 85°C) |
| Operating Humidity Range | 0 to 90%, non-condensing |
| Connections / Wire Size | Screw Terminal Blocks (Polarity Sensitive) / 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2) |
| Terminal Block Torque Rating | 0.37 ft-lb (0.5 Nm) nominal |
| Sensor Type / Sensor Curve / Sensing Points | Platinum RTD / PTC (Positive Temperature Coefficient) / One |
| Din Standard / Temperature Coefficient | DIN EN 60751 (IEC 751) / 3850 ppm/°C |
| Sensor Stability | +/- 0.03% after 1000 Hours at 300°C (572°F) |
| Response Time (63% Step Change) | 8 Seconds nominal |
| Sensor Operating Temperature Range | -40 to 200°C (-40 to 392°F) |
| Storage Temperature Range | -40 to 85°C (-40 to 185°F) |
| Operating Humidity Range | 10 to 90% RH, non-condensing |
| Probe Diameter / Thermowell Bore Diameter | 0.250" (6.35 mm) / 0.260" (6.60mm) |
| Probe Material / Thermowell Material | 304 Stainless Steel / 304 Stainless Steel |
| Thermowell Instrument Thread / Process Thread | 1/2" NPS (National Pipe Straight) / 1/2" NPT (National Pipe Tapered) |
| Fitting Material / Flammability Rating | Polyamide 66 (High Performance Nylon 66) / UL94-HB |
| Fitting Thread Size | 1/2" NPS (National Pipe Straight) Male Thread |
| Lead Length / Conductor Size | 14" (35.6 cm) / 22 AWG (0.65 mm) |
| Lead Wire Insulation / Wire Rating | Etched Teflon (PTFE) Colored Leads / Mil Spec 16878/4 Type E |
| Conductor Material | Silver Plated Copper |
| Model | 1KΩ |
| Configuration | Immersion with Welded Thermowell |
| Insertion Length | 6" Insertion |
| Output Signal | 4 to 20 mA |
| Enclosure | Polystyrene Plastic, -40 to 70°C (-40 to 158°F), UL94-V2, NEMA 4X (IP 66) |
