Sensaphone Monitoring System

Sensaphone 400 accepts four different inputs whether it is temperature or other type of sensor. The equipment comes with a plug in power supply that indicates power failures. It also can call up to four different phone numbers when an alarm has been detected. 

The Sensaphone 800 will do as 400 does, but it provides additional four inputs and four additional numbers.

Sensaphone Stratus EMS Monitoring System helps you to indicate data center facilities and environments. You can check climate and equipment-sensitive commodities at any time. If there’s a problem you’ll be first to know by the call or message on your mobile device.

If you don’t have a network the Stratus EMS can be used with Cellular Modem to provide cellular access. Such a device also allows you to put your Sensaphone in a place where connection may not be accessible, but a cellular signal is available.

Sensaphone WEB600 gives you the opportunity to monitor smaller scale applications such as computer rooms. It also includes a broad temperature sensing range (-109F to 168F) that makes it a perfect equipment for food and medical 

In the event of power failure the WEB600 Battery Backup can provide up to 2 hours of power.

Sensaphone WSG30 offers a flexible monitoring solution when hard-wiring sensors is not a cost-effective or viable option. It also works as a data logger to demonstrate compliance.

To get access to the work of your sensaphone over Wi-Fi you can use Sensaphone FGD-0250-U. Such equipment allows you to place your sensaphone in a place where the Ethernet connection isn’t available, but Wi-Fi signal is available.

Sensaphone FGD-0110 Temperature and Humidity sensors are used with Stratus EMS models to measure the temperature and humidity in a clean, dry environment. Stratus EMS will alarm when the temperature or humidity are at a low or high limit.

The RTD probe with 4-20mA transmitter can be used with a sensor to measure the temperature in extreme environments. It can work over the range -328 to 95F ( -200 to 35C), but also can be customized at time of order and work over the range -328 to 399,2F ( -200 - 204C).

Humidistat Humidity Switch is used to identify a high or low humidity level. It has a range of 10% to 80% of RH (Relative Humidity) level, the sensor alarms when the humidity is at a high or low level.

Spot Water Detection Sensor can be used with all Sensaphone models to identify water presence or leaks on a horizontal surface. When the water is identified, the sensor sends an alarm to the Sensaphone.

The Sensaphone Pressure Sensor is used to measure and identify loss of pressure in equipment. When there is a problem with a pump, loss of suction or a burst of pipe, the sensor alarms a problem to the Sensaphone.