Buy Weber Sensors 4120.12A S114/64 S110/47.5, Flow-Captor Switch, Switched

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Configuration:: Configuration: Switched, 47.5mm

Weber Sensors, 4120.12A S114/64 S110/47.5, Flow-Captor Switch, Energized, Switched, 47.5mm

Features:

EHEDG certified TYPE EL Class I April 2019
Precise switching flow monitor
High switching accuracy even with lower flows
Separate setting for set-point and range
Display of flow condition and adjusted switch point via LED chain
LED for output status
ISO 9001:2015

The flow-captor type is ideally suited for use in automation processes in the food industry where liquid media must be monitored. The sensor was specially designed for TRI-CLAMP® connections. The sensor operates according to the calorimetric measuring principle, fully electronically and without mechanically moved parts. The flow-captor detects the flow velocity of the medium and converts it into an electrical signal.

Connection diagram:

See more product information See less

Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Medium	water-based
Measuring range	0 - 20 cm/s to 0 - 300 cm/s, continuously adjustable
Medium temperature	-20 °C to +130 °C / -4 °F to +266 °F
Ambient temperature	-20 °C to +70 °C / -4 °F to +158 °F
Set-point range	approx. 15 % - 90 % of range setting
Pressure	up to 100 bar
Response time	2 sec. - 10 sec., according to range setting
Linearity deviation	< 5 %
Repeatability	< 2 %
Hysteresis	approx. 10 %
Temperature drift	< 0.3 % / K
Protection class	IP65
Material housing	PBTP, glass fibre reinforced
Material sensor head	stainless steel 316L, electropolished
Flange diameter	D50.5 mm / D64.0 mm
Cable connection	integrated plug assembly with PG9 fitting, 2 m oilflex cable 3 x 0.5 mm²
Operating voltage	18 to 30 VDC, incl. residual ripple
Current consumption	Maximum 150 mA (pulsed)
Power consumption	approx. 1 W
Switching current	≤ 400 mA
Circuit protection	reverse polarity, short circuit and overload
Voltage drop	< 2.5 V at Maximum load
Initial operation	approx. 10 sec. after connection of power
Switching condition with flow < switching point	energized, switched
LED	off
Switching condition with flow > switching point	currentless, not switched
LED	green

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Medium	water-based
Measuring range	0 - 20 cm/s to 0 - 300 cm/s, continuously adjustable
Medium temperature	-20 °C to +130 °C / -4 °F to +266 °F
Ambient temperature	-20 °C to +70 °C / -4 °F to +158 °F
Set-point range	approx. 15 % - 90 % of range setting
Pressure	up to 100 bar
Response time	2 sec. - 10 sec., according to range setting
Linearity deviation	< 5 %
Repeatability	< 2 %
Hysteresis	approx. 10 %
Temperature drift	< 0.3 % / K
Protection class	IP65
Material housing	PBTP, glass fibre reinforced
Material sensor head	stainless steel 316L, electropolished
Flange diameter	D50.5 mm / D64.0 mm
Cable connection	integrated plug assembly with PG9 fitting, 2 m oilflex cable 3 x 0.5 mm²
Operating voltage	18 to 30 VDC, incl. residual ripple
Current consumption	Maximum 150 mA (pulsed)
Power consumption	approx. 1 W
Switching current	≤ 400 mA
Circuit protection	reverse polarity, short circuit and overload
Voltage drop	< 2.5 V at Maximum load
Initial operation	approx. 10 sec. after connection of power
Switching condition with flow < switching point	energized, switched
LED	off
Switching condition with flow > switching point	currentless, not switched
LED	green

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Weber Sensors 4120.12A S114/64 S110/47.5 Flow-Captor Switch, Switched

Identifiers

Return and Warranty

Technical Details

Reviews