Viking E-70-SS Double Gang Entry Phone Proximity Reader

Viking, E-70-SS, E-70 Series Double Gang Entry Phone with Proximity Reader, Brushed Stainless Finish

Features:

• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
• Compact size: Front panel is the size of a typical single gang mid-size wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25" deep x 3.65" wide x 2.84" tall minimum)
• Comes in standard faceplate finish: Brushed Stainless Steel
• PNL-70 faceplate: Replacement faceplate with matching screws comes in standard finish
• Vandal Resistant Features: 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, fiberglass reinforced plastic speakerscreen, scratch resistant powder coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket,mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistantpowder coating
• Blue LED helps locate push button, indicate ringing and off hook
• Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed

Applications:

• Door or gate communication, business delivery entrances
• Use with any of Viking's Proximity Cards: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
• Use with a Viking C-200 or C-250 to control E-70 on a single line
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-70's and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-70's and door/gate control on a single phone line
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when used with a Viking SLP-1, SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown capability

The E-70-SS entry phone is a compact, weather, and vandal resistant speakerphone designed to provide two-way handsfree audio communication and proximity reader entry. The entry phone features a built-in 125 kHz proximity reader, microphone and speaker volume controls, selectable auto answer for monitoring, and intelligent call progress detection for automatic hang-up when the call is completed. The proximity reader outputs industry-standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any 26-bit Wiegand compatible controller.

The E-70-SS entry phone can share a single phone line with a house or small business telephones when used with a Viking model C-200, C-250, C-500 or C-2000B Entry Phone controller. The E-70-SS entry phone can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking K-1900-5 or K-1900-30 dialer.

The compact size of the E-70-SS allows it to be flush mounted in a standard double gang electrical box.

For more information, please see User Manual