Viking, E-60-BK-IP, E-60-IP Series Double Gang VoIP Entry Phone, Black Finish
E-60-BK-IP Includes Only:
- 1 x E-60-BK-IP Entry Phone
- 1 x Face Plate Black
- 1 x Faceplate Gasket
- 2 x Plate Adapter
- 1 x Light Pipe
- 4 x 6-32 x 1.25" Flat Head Hex Drive Screws Black painted
- 4 x 6-32 x 3/4" Flat Head Hex Drive Screws
- 1 x Hexkey 5/64
- 5 x Gel-Filled Butt Connectors
Features:
- Compact: Front panel is the size of a typical double gang mid-size wall plate
- Mounting: Flush mounts in a double gang electrical box (2.25" deep x 3.65" wide x 2.84" tall minimum)
- Comes in standard faceplate finish Textured Black
- Self diagnostic reports via email (testing com, microphone, speaker, and switch)
- Automatic polling and programming software included
- 2 Amp relay contacts for door / gate or SL-2 strobe light control
- Blue LED indicator
- SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) for proper operation in noisy environments
- VoIP eliminates the need for "Push to Talk" mode
- Network downloadable firmware
- Handsfree operation
- Programmable to dial up to 5 numbers on busy or ring no answer
- Cycles through backup phone numbers on busy or no-answer
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Extended temperature range (-40°F to 140°F)
- Volume adjustments for microphone and speaker
Applications:
- Gate Entrance
- Parking ramps/lots
- ATM machines
- Medical centers
- Lobbies
- Entryways
- Stadiums
- Convention centers
- Public access areas
Certifications:
- CE
- Canada ICES
- FCC Part 15
- SIP
The E-60-BK-IP is a compact, vandal resistant VoIP entry phone designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-60-BK-IP VoIP entry phone can be programmed from any touch tone phone, PC, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers. On-board 2 Amp relay contacts are provided for activating doorstrikes or gate controllers. For added security, an optional RC-4A Secure Relay Controller can also be used.
The E-60-BK-IP VoIP entry phone features a blue LED that continually provides light for locating the push button in dark locations, flashes during dialing, and automatically lights again when the call is answered. The unit is PoE powered and all programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries.
The compact size of the E-60-BK-IP double gang entry phone allows it to be flush mounted in a standard double gang electrical box.
For more information, please see 
User Manual and Quick Start Guide
