Viking E-1600-53-IP Analog to VoIP Conversion Kit

E-1600-53-IP Includes Only:

• E-1600-53-IP Emergency Phone
• 3 x Gel-Filled Butt Connectors

Features:

• Automatic polling and programming software included
• 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
• Red "Call Connected" LED indicator
• SIP compliant
• PoE powered (class 1, <4 Watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• VoIP audio detection eliminates the need for "Push to Talk" mode
• Network downloadable firmware
• Handsfree operation
• Meets ADA requirements for Emergency Phones:
  • Automatically lights the "Call Connected" LED
  • Transmits a unique location ID code or voice announcement
• Non-volatile digital voice announcer with 28 seconds of voice memory
• Programmable to dial up to 5 numbers
• Cycles through backup phone numbers on busy or ring-no-answer
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Diagnostics for testing mic, speaker, relay
• Extended temperature range: -40°F to 140°F (-40°C to 60°C)

Applications:

• Elevators
• Parking ramps / lots
• Emergency pool phones
• ATM machines
• Medical centers
• Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
• Area of refuge locations
• Lobbies
• Entryways
• Campus emergency stations
• Stadiums
• Convention centers
• Public access areas

Certifications:

• CE
• Canada ICES
• FCC Part 15
• ADA
• SIP

The E-1600-53-IP ADA and CE Compliant Analog to VoIP Emergency Phone Conversion Kit is designed to convert a Viking analog phone to VoIP. The kit saves money by re-using the housing, faceplate, mic, speaker, switch, and LED. It is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-53-IP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phones can dial up to 5 programmable emergency numbers.

The E-1600-53-IP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Additionally, a DTMF touch tone code may also be delivered. A "Call Connected" LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

For more information, please see User Manual and Quick Start Guide