999-6911-200 Includes Only:
- Vaddio WideSHOT SE QUSB IP Camera System
- Thin-Profile Wall Mount
- Vaddio IR Shot Commander Remote
- 2 x AAA Batteries
- 2 x 1-5/8" Nylon Self-Drilling Drywall Anchors
- 2 x #8 x 1.25" Sheet Metal Screws
- 2 x Black Oxide 1/4-20 x 1/2" Pan Head Screws
- Quick-Connect USB Mini Interface
- 24 VDC 2.08A Power Supply and Power Cable
- 6' USB 2.0 Type-A to Type-B Cable
- 4 x Rubber Feet for QUSB
- Vaddio EZCamera Control Adapter
Capture full motion video in a small UC conference room or executive office with the WideSHOT SE QUSB IP Camera System from Vaddio. The fixed camera has a wide horizontal field of view of 111° in a 16:9 HD format, a fixed lens with 3x digital zoom, and offers manual pan/tilt positioning. The 1/2" CMOS image sensor allows you to shoot a wide scene in dimly lit auditoriums. The camera uses the Vaddio EZCamera Cat 5 wiring standard for video, power, and control. Using the Vaddio HSDS video outputs over Cat 5 cable, the WideSHOT SE supplies video at resolutions up to 1080p/60 that are selectable from the rear panel. Choose between three IR frequencies for the IR Remote Commander to allow multiple cameras to be locally controlled with a single remote control. The camera also provides an OSD for easy setup and basic image control accessible with an IR remote. The included Quick-Connect USB Mini interface provides web-based camera control. Simply connect a PC with a USB 2.0 port to the USB Type-B connector on the front panel of the USB Mini, connect the camera Cat 5 and connect the power supply, and the UVC drivers will automatically negotiate the highest possible resolution that the PC, UC application, and USB Mini can provide; up to 720p at 30 fps. An integrated mounting flange is built in for easy under-table or wall mounting. For added convenience, an EZCamera control adapter is included.
Features:
- HD video select via 16-position rotary switch used to set HD video resolution output
- Six-position dip switch for IR frequency, image flip, and digital zoom
- RJ45 connector is used with the Quick-Connect USB and USB Mini interfaces to supply power and return HSDS video from the camera over Cat 5 cable
- Cat 5 cable up to distance of 150'
- RS-232 port accepts modified VISCA protocol for camera control
- The camera features presets, CCU functions, scene/room labels, security features, and diagnostic web pages
- USB 2.0 video streaming using UVC drivers in MJPEG format