| Type | Power amplifier |
| Power Requirement | AC mains, 120 V, 60 Hz |
| Power Consumption | 180 W |
| Output Power | 120 W RMS |
| Power Band Width | (D) 20 - 20,000 Hz, 0.5% THD
(T) 50 - 20,000 Hz, 0.5% THD |
| Frequency Response | (D) 20 - 20,000 Hz, +/-1 dB
(T) 20 - 15,000 Hz, +/-1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB |
| T.H.D | 0.01% at 1 kHz, rated output |
| Inputs | One Input Port : Port accepts any input module expect T-01.
One Direct Input
Use of direct input prohibits use of modular input port. |
| Input Sensitivity /Impedance | Input Port : 100 mV or 1000 mV (switchable)/10 k Ohm
Direct Input : 100 mV or 1000 mV (switchable)/10 k Ohm |
| Outputs(T)=Transformer (D)=Direct | Main (T) : 8 Ohm , 25 and 70 volts, balanced
Main (D) : 4 Ohm , unbalanced |
| Output Regulation(1kHz) | (D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load |
| S/N Ratio(Band Pass 20 - 20,000 Hz) | Input level switch in 0 dBV (1000 mV) position : 108 dB
Input level switch in -20 dBV (100 mV) position : 90 dB |
| Controls | 1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch |
| Indicators | 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
| Protection | Self-protection, with AC fuse (inside) |
| Connectors | Input : Card-edge connector and screw-terminal strip
Output : Screw-terminal strip
AC outlet : 3-pin grounding type
AC power cord/plug : SJT, 3-prong type |
| Temperature Range | -10°C - +60°C (12°F - 140°F) |
| Finish | Black |
| Dimensions(WxHxD) | 420(16.54") x 99.1(3.90") x 358(14.09") mm |
| Weight | 10.9 kg (24.03 lb.) |
