TOA N-8000MI CU Multisource Interface for the N-8000 Intercom System
Brand New
Manufacturer warranty Description
TOA, N-8000MI Multisource Interface for the N-8000 Intercom System, BGM, TEL, EXES, Control I/O, 120 V AC, 50/60 Hz
The N-8000MI is a multisource interface for the N-8000 intercom system. When used as an analog audio bridge to the N-8000 intercom system, it accepts two line-level inputs which can be broadcast to any paging zone or station on the system. Two line-level outputs are provided, with sixteen contact closure inputs and sixteen relay outputs. Contact closures may be synchronized with a paging event, linked to contact closure inputs, be triggered by a station call, be triggered by IP control or a master station, or be triggered by a fault in the network or a 2-wire (N-8000EX/N-8010EX) line fault for 24/7 supervision. Rack mount and wall mount hardware included
Technical details
- Weight 2.8 kg
- Dimensions 420 (W) x 44.3 (H) x 239.5 (D) mm
- Type Multi-Interface
- Finish Pre-coated steel plate, black, 30 % gloss
- Power Consumption 16 W (250 mA) (at rated), 21 W (330 mA) (max.)
- Operating Temperature 0 °C to +40 °C
- Operating Humidity 90 %RH or less (no condensation)
- Power Source 120 V AC, 50/60 Hz
- Installation Method Rack, Desk, Surface mount
- Others Firmware update function, System registration data entry hold facility, Time of day hold facility, Reset switch (front panel)
- Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp
- Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 16), Multicast (max. 191) Connector: RJ45 connector Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software) Quantifying bit number: 16-bit Voice encoding method: Sub-band ADPCM, Cryptosystem Voice packet loss recovery: Silence insertion Audio delay time: 80 ms, 320 ms (controllable on the software)
- Audio Input (*3) Input: 2 inputs (2 P/input), Max. 0 dB (*1), 600 Ohm or less, balanced, with a semi-fixed volume for adjustment (0 to -25 dB) Control: 2 inputs (2 P/input), no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 10 mA Removable terminal block (8 pins)
- Audio Output (*3) Output: 2 outputs (2 P/output), Max. 0 dB (*1), 600 Ohm or less, balanced Control: 2 outputs (2 P/output), relay contact output, contact capacity: 24 V DC/0.5 A Removable terminal block (8 pins)
- Contact Input (*3) 16 inputs, no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 10 mA, removable terminal block (18 pins)
- Contact Output (*3) 16 outputs, relay contact output, contact capacity: 24 V DC/0.5 A, removable terminal block (18 pins)
- PBX I/F (*3) PBX input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less, 600 Ohm , balanced, mini-clamp connector (2 pins), with adjustment functions for both input and output (Input: 0 to +15 dB, Output: -15 to 0 dB), Analog E andM interface
- Tie-line I/F (*3) Tie-line input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less, 600 Ohm , balanced, mini-clamp connector (2 pins) Signal method: EXES-2000/EXES-6000 tie-line method Selective signal: DTMF signal
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.