Solinst 112156 101B Replacement Tape, P1/CM3/60m for Level Meter

Solinst, 112156, 101B Replacement Tape, P1/CM3/60m for the Water Level Meter

112156 Includes Only:

• Replacement Tape Assembly
• P1B Probe attached
• Grommet
• Screwdriver

Instructions:

• Place the reel on a flat workbench with the faceplate up. Undo the three screws from the faceplate, including the screw from the probe holder, and slowly remove the faceplate from the reel.
• solinst 101b tape replacement replacing 101b water level meter tape how to replace solinst tape how to replace solinst white tape how to replace solinst white polyethylene flat tape instructions to replace solinst white tape
• Unwind the old tape from the reel.
• Remove the battery from the PCB assembly.
• Removing Battery from Solinst 101B Water Level Meter
• Press down on the white terminals, and pull out to remove the tape leads from the PCB assembly.
• Solinst 101B Water Level Meter Flat Tape Connection to Circuit Board Assembly
• Undo the two screws from the black plastic bridge holding the tape inside the reel hub, and remove the top piece of the bridge.
• Pull the old tape through the grommet in the opening of the reel hub and remove the old tape from the reel.
• Feed the tape through the grommet into the reel hub. Allow about two feet of slack to work with.
• Position the tape inside the reel hub with the black plastic bridge over top (see diagram above). Refasten the two screws to secure the tape to the reel.
• Push down on the white terminals and insert the tape leads into the PCB assembly. Release the terminals and the tape leads should be secured.
• Note:It does not matter which lead goes into which terminal.
• Replace the battery in the PCB assembly.
• Dip the probe in a glass of tap water. If the connections are correct, the buzzer and light on the Meter will be activated. Check connections if the buzzer and light do not activate.
• Attach the faceplate to the reel using the three screws. Remember to replace the probe holder using the top left screw.
• Slowly wind the tape onto the reel, holding to ensure no slack.