Manufacturer warranty Description
Changes in pH can be critical to water quality. Whether it be in a swimming pool, or more critical applications such water and wastewater treatment facilities, or clean water applications such as laboratories, food and beverage, HVAC systems or healtcare, this integral two-wire 4-20mA pH transmitter can be feed data directly to your Sensaphone device. If set limits are exceeded, the Sensaphone will send alarms to appropriate personnel. The sensor includes a measuring range of 0 to 14pH, replaceable saltbridge for extended service life, flow-thru, hot-tap or submersible mounting, and automatic temperature compensation.
Technical details
- Output 4-20mA
- Flow Rate 10 ft./sec maximum (3 meters/sec) Flow should be as low as possible in water with low conductivity water or high suspended solids
- Measuring Range 0 to 14pH
- Resolution 0.01mA
- Sensitivity <0.005 pH
- Pressure Limit 100 psig at 65°C maximum
- Stability 0.03 pH per day, non-cumulative
- Mouting 1.5" NPT, Fixed threads on both ends, flow thru or submersible mounting
- Wetted Materials CPVC, Kynar/ceramic, titanium, Viton
- Temperature Compensation Automatic -5 to 95°C (23 to 203°F) RTD
- Temperature Limits -5 to 95°C | 23 to 203°F
- Saltbridge Replaceable for extended service life
- Power Supply Limit 24(+-4) VDC
- Probe Cable 24 AWG Two conductor shielded w/ Ground, 15 ft. (4.6m)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.