RuB S84I15 k.84 2" Ball Valve FIPxFIP BSPP Blue Lockable Handle

Features:

• Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
  • Chrome plated brass ball for longer life with rinse hole
• Body
  • Valve length according to DIN 3202 M3 specification
  • Finest brass according to EN 12165 and EN 12164 (formerly
• DIN 17660 and UNI 5705-65) specifications
  • Hot forged sand blasted external nickel plated brass body and cap sealed with Loctite® or equivalent threads sealant
• Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
• Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
• Threads
  • EN 10226-1, ISO 228 parallel female by female threads
• Flow
  • Full port to DIN 3357 for maximum flow
• Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
• Working pressure & temperature
  • 40 bar (600 PSI) non-shock cold working pressure
  • -40°F to +350°F (-40°C to +170°C)
  • For use with dangerous fluids temperature rating is -4°F +140°F (-20°C +60°C) and pressure rating is 72psi (5 bar)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
• PED directive
  • Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by ICIM (0425)
• Approved by or in compliance with
  • DIN-DVGW (Germany)
  • BSI Group (United Kingdom)
  • GOST-R (Russia)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

Valve Parts:

1. Nickel plated body (external treatment)
2. Ball seat
3. Chrome plated ball with rinse hole (read rinse hole on sizes from 3/4" up to 2")
4. Nickel plated end-cap (external treatment)
5. Nickel plated stem O-ring design
6. Geomet® nut
7. O-Ring
8. Yellow PVC coated Geomet® steel handle

Pressure-Temperature Chart:

Pressure Drop Chart: