RuB, S42I15, s.42 2" Ball Valve 2" Solder Ends (SxS) with Blue Lockable Handle
Features:
- Quality
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Chrome plated brass ball for longer life
- Handle stops on body to avoid stress at stem
- Body
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 specifications
- Stem
- Blowout-proof nickel plated brass stem
- Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
- Sealing
- Pure PTFE self-lubricating seats with flexible-lip design
- Connections
- Solder end female by female connections
- Flow
- Full port to DIN 3357 for maximum flow
- Handle
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Working pressure & temperature
- 600 PSI (40 bar) up to 2", 450 PSI (30 bar) over 2", (150 WSP -10 bar all sizes) non-shock cold working pressure
- NOTE: for solder joints ratings see Table 1 on reverse
- 250 PSI (17 bar) non-shock working pressure for LP-Gas
- *150 psig (10 bar) non-shock working steam pressure. Not suitable for throttling steam.
- -4°F/+366°F (-20°C / +170°C) (for solder joints ratings see Table 1 on reverse)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Approved by or in compliance with
- Underwriters Laboratories (United States, Canada):
- - Guide YSDT: LP-Gas shut-off valve
- - Guide YRBX: Flammable liquid shut-off valve
- - Guide YRPV: Gas shut-off valve for use with natural and manufactured gases
- - Guide MHKZ: No. 6 oil at 250°F
- GOST-R (Russia)
- RoHS Compliant (EU)
- CRN-TSSA acc. to MSS SP110 (Canada)
- Meeting WW-V-35C Federal U.S. Specification (United States)
Note: approvals apply to specific configurations/sizes only
Valve Parts:

- Unplated solder end body
- Seat
- Chrome plated ball
- Unplated solder end-cap
- Nickel plated stem packing gland design
- Nickel plated gland nut
- Geomet® nut
- Packing gland seal
- Washer
- Yellow PVC coated Geomet® steel handle