RuB ET3C135IF0 S.135 Actuation Kit, 2" Valve, 24VAC
Brand NewNotification
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Manufacturer warranty Description
RuB, ET3C135IF0, S.135 Actuation Kit with 2" Ball Valve, 24 VAC
ET3C135IF0 Includes Only:
- S.135 Stainless Steel Flanged Full Port Manual/Actuatable Ball Valve, 2"
- E-Tork heavy-duty electric actuator, 24VAC
Features:
- Quality:
- Anti-static device
- Locking device
- Long cycle life
- Test standard: API 598
- API 607 4th edition fire safe approval
- Vacuum service to 29" Hg
- Body:
- Body: ASTM A351 Gr. CF8M
- Stem:
- Blow-out proof stem design
- Adjustable stem packing
- Connections:
- ANSI B16.5, B16.10 and B16.34 full compliance
- Handle:
- Handle in ASTM A536 Gr. 65-45-12
- Warning: do not exceed reasonable temperature and/or electrical load
- Working pressure & temperature:
- General use: 750 PSI (see chart on reverse)
- 275 PSI for ASME 150 CF8M (see chart on reverse)
- Warning: freezing of the fluid in the installation may severely damage the valve
- Approved by or in compliance with GOST-R (Russia)
Note: approvals apply to specific configurations/sizes only.
Valve Parts:
- Body
- Cap
- Ball
- Stem
- Seat
- Gasket
- Thrust washer
- Packing
- Gland
- Stopper
- Snap ring
- Gland bolt
- Handle
- Locking plate
Torque Correction Factors:
Valve torque can vary according to the operating frequency, temperature, and friction characteristics of the media. If the media has more or less friction than water, multiply torque by the following factors.
Pressure-Temperature Chart:
Features of Actuator:
- Direct mount on RUB ball valves, for a compact package and perfect shaft alignment
- 50% rated duty cycle reversing motor with thermal overload protection
- Rugged corrosion-resistant construction with aluminum housing, durable epoxy/polyurethane
- Coating, 316 stainless shaft, and fasteners
- Manual override shaft - stainless steel type 316
- Can be wired in parallel with other
- E-Torks - separate circuits not required
- ISO 5211 mounting
- Fast, simple travel adjustments
- 2 limit switches for travel indication
- Heat-treated steel gearing, lubricated for life
- 180° travel capability
- NEMA 4 and 4X enclosure
Technical details
- Power Supply (VAC) 24
- Valve Size (in) 2
- Torque in-lb 443
- Amps Locked Rotor AC: 0.5 12-24 DC/AC: 3.0
- Speed, Seconds/90° 20
- Steam Rating 150 PSI WSP
- Torque for Actuator Sizing, in-lb Valve torque to open: 376.15 Valve torque to close: 376.15
- Lubricating Oils or Liquids 0.8
- Dry Gases, Natural Gas 1.5
- Slurries or Liquids Bearing Abrasive Particles 1.5/2.5
- Cv Factor 146
- Temperature Operation -50°F to +475°F
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.